1 / 7ELEGOO Saturn 4 Ultra 12K Resin 3D Printer
The ELEGOO Saturn 4 Ultra is a resin 3D printer listed with a 10-inch 12K mono LCD, automatic leveling, a camera and tilt-release printing. Its claimed 150mm/h top speed and 218.88x122.88x220 mm³ build size target detailed, larger resin prints, while customer feedback also raises concerns about screen reliability and durability.
At a glance
- The listing specifies a 10-inch 12K mono LCD with 11520x5120 resolution and 19x24μm XY resolution for fine resin-print detail.
- Tilt-release technology is claimed to speed model separation, with a maximum print speed of 150mm/h.
- Automatic leveling, startup self-check and a camera for live monitoring and time-lapse capture reduce some setup and monitoring steps.
- Foreign-object detection and a resin-shortage alarm are listed as print prompts.
Often bought together

ELEGOO Mercury X Bundle, Wash and Cure Machine | Compatible with Saturn, Mars, Photon MSLA DLP LCD Resin 3D Printers, Washing Size of 7.91" × 4.88" × 10.03"
$171.99

ELEGOO Water Washable 3D Printer Resin Ceramic Grey 2000g | 405 nm UV Curing Photopolymer résine for Mars Saturn Jupiter MSLA DLP LCD imprimant with Low Odor
$50.15
Pros and cons
Pros
- The listed build size gives more room for larger or multiple parts than a compact resin printer.
- Automatic leveling and a startup self-check may simplify initial setup.
- Camera monitoring and time-lapse capture are described, alongside tilt release and resume-after-power-outage capability.
Technical specifications
19 specifications| Brand | ELEGOO |
|---|---|
| Model | SATURN 4 ULTRA |
| Part number | AU-EL-3D-S4U |
| Screen technology listed | LCD |
|---|---|
| LCD size | 10-inch |
| LCD resolution | 11520x5120 |
| XY resolution | 19x24μm |
| Printing technology | Resin 3D printer |
|---|---|
| Maximum listed print speed | 150mm/h |
| Build size | 218.88x122.88x220 mm³ |
| Light source wavelength | 405nm |
| Material listed | Aluminum |
|---|---|
| Colour | Grey |
| Leveling | One-touch Automatic Leveling |
|---|---|
| Release mechanism | Tilt Release Technology |
| Camera features | Real-time monitoring, time-lapse photography, light board detection, edge warping detection |
| Mechanical sensor functions | Automatic leveling, foreign body detection, resin detection |
| Power recovery | Resume printing after a power outage |
| Startup check | Self-check |
What to know before buying
- The 150mm/h figure is a claimed maximum, not an assured speed for every print. The listing says the first 50 layers print slowly in either mode, and resumed prints may show a line where printing was interrupted.
- The manufacturer says live camera monitoring is online in real time, with time-lapse available for later viewing.
Listing details to confirm
Listing details are contradictory or inconsistent for outer dimensions and weight: dimensions are given as both 61.8D x 40.4W x 44H centimetres and 60.96 x 40.64 x 40.64 cm, while weight is listed as 18.14 kg and 18.1 kg. Confirm the exact unit dimensions and weight before arranging space or handling.
What’s in the box
Included- Saturn 4 Ultra 3D printer
- Wi-Fi antenna
- Build platform
- Resin tank
- Camera
- Drip tray
- USB flash disk
- Mask
- Gloves
- Funnel
- Mounting screws
- Adapter
- Tool kit
- Scraper
- User manual
Who is it for?
A good fit for
- Resin-printing users seeking a larger build area and fine stated XY resolution.
- Makers who value one-touch leveling, camera monitoring and time-lapse recording.
Less suited to
- Buyers who need consistently verified screen durability, given reported screen reliability and durability concerns.
- Anyone seeking a printer that does not require resin-printing setup and handling.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
8% 8% - 3 stars
4% 4% - 2 stars
4% 4% - 1 star
9% 9%
Customer feedback describes the printer as easy to use and praises print speed and detail, but also reports concerns about value, screen reliability and durability, with overall reliability experiences varying. The reported screen concerns are especially relevant for a printer built around an LCD, and the positive comments align with its stated detail and speed-oriented features without confirming the manufacturer’s performance claims.
Positive themes
- Customers describe it as easy to use and praise the print detail and speed.
Negative themes
- Customer feedback includes complaints about value, screen reliability and durability.
Mixed feedback
- Experiences with overall reliability vary.
Frequently asked questions
Does it print at 150mm/h for every job?
The listing claims a maximum of 150mm/h. It also says the first 50 layers print slowly in both fast and slow modes, so actual print time depends on the job.
Can the camera feed be watched later?
The listing says real-time monitoring is viewed online and is not available for playback. Time-lapse video can be viewed later.
What happens after a power outage?
The listing claims the printer can resume a print after a power outage, and notes that an interruption may leave a visible line in the model.
Are the listed outer dimensions and weight settled?
No. The listing gives two different outer dimension sets and two weights. Confirm the exact measurements before planning a workspace.

Alternative options

ELEGOO Mars 5 Ultra 9K Resin 3D Printer, 150mm/h High Speed Printing, Smart Automatic Leveling, Intelligent Detection, WiFi-Transfer, Printing Size of 153.36 x 77.76 x 165 mm³
$408.49

ELEGOO 8K ABS-Like 3D Printer Resin Space Grey 2000g | 405 nm Photopolymer Resin for 12K/14K/16K Mars Saturn Jupiter MSLA DLP LCD 3D Printing with Strength and Toughness
$38.99

ELEGOO Upgraded 8K Standard 3D Printer Resin Space Grey 1000g | 405 nm UV-Curing Photopolymer résine Best for 8K/12K/14K/16K Saturn MSLA DLP LCD 3D Printing
$22.99

ELEGOO Jupiter 2 Large 16K Resin 3D Printer, Auto Resin Feeding | Auto-Leveling, Smart Tank Heating, Smart Mechanical Sensor, Wi-Fi Cluster, Build Size 302.4 × 161.98 × 300 mm
$1,049.00

ELEGOO Mercury Plus V3.0 Wash and Cure Station | 7.5L Large Capacity, Compatible with Mars Saturn Photon MSLA DLP 3D Printers, Washing Size of 9.05" × 5.31" × 10.24"
$179.99

ELEGOO Centauri 2 Combo 3D Printer CoreXY Build Volume 256×256×256mm | 500mm/s High-Speed CoreXY with Canvas 4-Color Printing, Auto Leveling, Smart Filament Detection, 350°C High Temp Nozzle
$424.15

FLASHFORGE AD5X Multi-Color 3D Printer 4 Colors with IFS, Fully Auto Leveling FDM 3D Printer with Max 600mm/s High Speed Printing and Max 300°C Nozzle, Large Printing Size 220 * 220 * 220mm (AD5X)
$459.00

2pcs Silicone Spatula, 3D Printer Scraper Suitable for Removing Printer Oil Scraper Tools, Remove Printing Resin Rubber Spatula Tools, Vital for Flexible Silicone Printers Silicone Scraper Tools
$8.49

ELEGOO 3PCS FEP Release Film for Mars 4 & Mars 5 & Mars 5 Ultra LCD 3D Printer with 95% Light Transmittance, 206 ラ 146mm, 0.15mm Thickness
$15.33

ELEGOO Mars 5 Ultra 9K Resin 3D Printer, 150mm/h, Auto Leveling, AI Camera | MSLA Mono LCD, 18 Micron XY Resolution; Tilt Release Works with Standard Resin, No ACF Film Needed; WiFi Cluster Printing
$359.47

ELEGOO Centauri 2 3D Printer CoreXY Build Volume 256×256×256mm | 500mm/s High-Speed, Smooth Print Quality, Full Auto Calibration, 350°C High-Temp Nozzle, for Beginners & Makers
$341.10

ANYCUBIC Photon Mono 4 Resin 3D Printer, 7" 10K Mono LCD Screen | with Stable LighTurbo Matrix, 70mm/h Fast Printing 3D Printer, Print Volume 6.04" x 3.42" x 6.49" / 153 x 87 x 165mm
$223.99























