1 / 7ELEGOO ASA Filament, 1.75 mm, 1 kg, Deep Black
ELEGOO ASA Filament is a 1.75 mm, 1 kg spool in deep black, listed for UV- and weather-resistant outdoor parts. The manufacturer also claims heat resistance up to 99 °C and recommends an enclosed printer for consistent results.
At a glance
- The ASA formulation is marketed for outdoor functional parts exposed to sun and weather.
- The manufacturer lists a heat deflection temperature up to 99 °C / 210 °F.
- Printing guidance cites enclosed 3D printers for stable extrusion and reduced warping.
- The spool is claimed to be dried and vacuum-sealed with desiccant before packing.
Pros and cons
Pros
- UV and weather resistance claims suit buyers making outdoor components.
- A 1.75 mm diameter and 1 kg spool make the listed format clear for buyers matching those requirements.
- The stated heat-deflection figure may help buyers compare material choices for warmer environments.
Cons
- The manufacturer recommends an enclosed printer, which may limit convenience for users with open-frame setups.
Technical specifications
7 specifications| Brand | ELEGOO |
|---|
| Weight listed | 1 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Colour | 1kg Asa Deep Black |
| Material listed | Acrylonitrile Styrene Acrylate |
|---|---|
| Additional feature | UV & Weather Resistant |
| Heat deflection temperature | up to 99 °C / 210 °F |
What to know before buying
Listing details to confirm
Performance descriptions, including weather resistance, reduced warping and heat resistance, are manufacturer claims rather than independently verified results. Confirm printer suitability and settings for your specific setup.
Who is it for?
A good fit for
- Makers printing functional parts intended for outdoor exposure.
- Users with an enclosed 3D printer seeking black ASA filament in a 1.75 mm format.
- Buyers comparing filament for parts where the listed heat-deflection figure is relevant.
Less suited to
- Users whose printer cannot accommodate the listed 1.75 mm filament.
- Those seeking a material specifically supported for open-frame printing, as the listing recommends an enclosure.

Customer reviews on Amazon
- 5 stars
76% 76% - 4 stars
10% 10% - 3 stars
7% 7% - 2 stars
2% 2% - 1 star
5% 5%
Customer feedback describes the filament as decent quality and often appreciates its perceived value and flexibility. Reports are mixed on printability, durability and colour consistency, with some users mentioning tangled or gummy filament. These experiences matter when reliability and finish are priorities, while the listed 1.75 mm diameter and outdoor-oriented ASA claims describe the product configuration rather than proving a consistent result for every printer.
Positive themes
- Some customers describe the filament as good quality and appreciate its perceived value.
- Flexibility is mentioned positively in customer feedback.
Negative themes
- Some customers report tangled or gummy filament.
Mixed feedback
- Customer feedback is mixed on printability, durability and colour consistency.
Frequently asked questions
What diameter is this ELEGOO ASA filament?
The listing specifies a diameter of 1.75 millimeters.
Is this filament described for outdoor use?
Yes. The manufacturer claims UV and weather resistance and positions it for outdoor functional parts, but those claims are not independent test results.
Does it require an enclosed printer?
The manufacturer says consistent printing performance is optimized when printing on an enclosed 3D printer. Check compatibility and settings for your printer.
What heat resistance does the listing state?
It gives a heat deflection temperature up to 99 °C / 210 °F. Treat this as a manufacturer claim, not a verified performance guarantee.

Alternative options

Polymaker ASA Filament 1.75mm Black 1KG, UV & Weather Resistant | Outdoor Functional Parts, Durable, High Heat Resistant, Impact-Resistant, Reliable Layer Adhesion, 3D Printer Filament
$24.99

ELEGOO PLA+ Filament 1.75mm Black 4KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$51.84

ELEGOO ABS Filament 1.75mm Black 1kg | High Toughness & Impact Resistance, Heat & Water Resistant, 1kg Spool Filament for FDM Printers
$20.39

Polymaker Fiberon ASA-CF08 Filament Black 1.75mm 0.5KG | UV & Weather Resistant, High Rigidity, Heat Resistant, Easy to Print, Outdoor Functional Parts & Prototypes, 8% Carbon Fiber
$24.63

ELEGOO PETG Filament 1.75mm Black/White/Red/Blue 4KG, Strong & Durable | Neatly Wound for Smoother Feeding, Dimensional Accuracy +/- 0.02mm, Fits for Most FDM 3D Printers, 4 Pack 1kg Spools (2.2lbs)
$56.99

ELEGOO Carbon Fiber PLA Filament 1.75mm Black 1KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 1kg Spool 3D Printing Filament, Fits for Most FDM 3D Printers
$23.39

ELEGOO PLA Basic Refill 3D Printer Filament 1.75mm Black 4KG | Dimensional Accuracy +/- 0.02mm, No Spool, For Refilling Reusable Spools
$46.74

ELEGOO PLA+ 3D Printer Filament 1.75mm White 4KG | High Toughness PLA Plus, Dimensional Accuracy +/- 0.02mm, 4pcs 1kg Spools, Fits for Most FDM 3D Printers
$49.29

ELEGOO PLA Filament 1.75mm Black 4KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 4 Pack 1kg Cardboard Spools(2.2lbs) 3D Printing Filament, Fits for Most FDM 3D Printers
$50.99

ELEGOO PLA 3D Printer Filament 1.75mm Black 4KG, Vibrant Color | Neatly Wound for Smoother Feeding, Dimensional Accuracy +/- 0.02mm, 4pcs 1kg Spools(2.2lbs), Fit Most FDM 3D Printers
$50.14

ELEGOO PLA Matte 3D Printer Filament 1.75mm Black 4KG | Rich Matte Color, Less Visible Layer Lines, High Precision, 1kg Plastic Spool, Fits for Most FDM 3D Printers
$52.69

ELEGOO Rapid PETG 3D Printer Filament 1.75mm Black 2KG White 2KG | Max 600mm/s High Speed Printing, Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer 4Pack 1kg Cardboard Spools
$57.99























