Loonie PerksDeals for Canada
BlogSearch
Product guide

DURAMIC 3D PLA Plus 1.75 mm Light Blue, 1 kg

DURAMIC 3D PLA Plus is a 1 kg spool of light-blue PLA+ filament for 1.75 mm 3D printer setups. The listing positions it for tougher functional prints and gives recommended nozzle, bed and speed ranges, but customer feedback also reports breakage and stringing for some users.

At a glance

  • PLA+ is promoted as having enhanced impact strength for functional models needing more toughness than ordinary PLA.
  • The listed 1.75 mm diameter suits printers configured for that filament size.
  • The listing describes a cardboard spool, resealable packaging with desiccant, and storage holes for securing the filament end.
Price
$21.99Save 33%

Reference price: $32.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • The 1 kg light-blue spool and stated 1.75 mm diameter make the size and colour choice clear for buyers with compatible printers.
  • The listing supplies suggested nozzle, bed and speed ranges, giving users a starting point for setup.

Cons

  • Some customers report filament breaking during printing and stringing, while adhesion feedback is mixed.

Technical specifications

11 specifications
Identity
BrandDURAMIC 3D
ModelPLA PLUS-LBL-US
Dimensions and installation
Dimensions listed20 x 20 x 6.6 cm; 1 kg
Weight listed1 kg
Filament diameter1.75 millimeters
Materials and protection
Material listedPolylactic Acid
Colour listed1kg Light Blue
Printing details
Diameter tolerance claims100% ±0.05mm, 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm.
Recommended nozzle temperature220±10C
Recommended bed temperature25-60C
Recommended print speed30-70mm/s

What to know before buying

Listing details to confirm

The listing gives different print-speed recommendations: 30-70mm/s in its settings bullet and 40-80mm/s in the product description. Its tolerance is also variously presented as 99% ±0.03 mm and as a set of percentages across several tolerance bands, so treat these as listing claims rather than one settled measurement. Keep the filament sealed with desiccant when not in use, as the listing advises.

Who is it for?

A good fit for

  • 3D printer owners whose machines use 1.75 mm PLA and who want a light-blue filament marketed for tougher functional models.
  • Buyers who want stated temperature and speed ranges to use as initial print-setting guidance.

Less suited to

  • Users whose printer requires a different filament diameter or material.
  • Buyers who need a single consistent speed recommendation or assurance against breakage, stringing or adhesion variation.
DURAMIC 3D PLA Plus 1.75 mm Light Blue, 1 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 6,515 ratings
  • 5 stars71%71%
  • 4 stars15%15%
  • 3 stars5%5%
  • 2 stars3%3%
  • 1 star6%6%

Customer feedback commonly describes good overall quality, print results and functionality, which may suit routine PLA+ projects. Some users also report filament breakage and stringing, and adhesion experiences vary. Those reports matter for longer or functional prints, where interruption and print cleanup can be more consequential. The listing's tougher-PLA positioning is a product claim, not proof that every spool will avoid these concerns.

Positive themes

  • Customers report good overall quality and print results.
  • Feedback describes the filament as working well for some users.

Negative themes

  • Some customers report filament breaking during printing.
  • Stringing is also raised as a concern.

Mixed feedback

  • Customer experiences with adhesion vary.

Frequently asked questions

What filament size is this?

The listing gives a diameter of 1.75 millimeters. Confirm your printer uses that size before buying.

What print settings does the listing recommend?

One listing section gives a nozzle temperature of 220±10C, bed temperature of 25-60C and speed of 30-70mm/s. The product description instead gives 40-80mm/s, so the speed guidance is inconsistent.

Is this filament claimed to be tougher than standard PLA?

Yes. The listing markets the PLA+ for enhanced impact strength and functional models, but this is a manufacturer claim rather than an independently verified result.

What do customers report about printing?

Feedback describes good print quality and functionality, but also mentions breakage and stringing. Adhesion experiences are mixed, so results may vary with setup and use.

DURAMIC 3D PLA Plus 1.75 mm Light Blue, 1 kg · photo 3
Additional product photo 3

Alternative options

Product details in Markdown