Loonie PerksDeals for Canada
BlogSearch
Product guide

DMT D8C 8-Inch Coarse Diamond Sharpening Stone

The DMT D8C Dia-Sharp is an 8-inch coarse diamond sharpening stone with a continuous sharpening surface. Its coarse grade is intended for quickly restoring neglected edges, while the wide surface is listed for use with knives and chisels.

At a glance

  • The 8-inch continuous surface is described as suitable for edges ranging from knives to chisels.
  • Coarse diamond grit is listed for quickly restoring neglected edges.
  • The manufacturer says it can be used dry or with water, without sharpening oils or compounds.
  • Non-skid rubber feet are stated to be included.
Price
$69.41Save 20%

Reference price: $86.76

Price checked: Nov 20, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The continuous surface offers room for both long and short edges, according to the manufacturer.
  • Dry or water-assisted sharpening provides a choice of working method without requiring oil.
  • The coarse grade is aimed at edge restoration rather than being presented as a multi-grit stone.

Cons

  • This is a coarse, single-grade stone, so the supplied details do not indicate a finer surface for finishing an edge.

Technical specifications

8 specifications
Identity
BrandDMT
ModelD8C
Dimensions and installation
Dimensions listed20.3L x 7.6W x 1H centimetres
Weight listed1 kg
Materials and protection
Material listedSynthetic
Sharpening
GritCoarse
Abrasive size45 micron / 325 mesh
SurfaceContinuous monocrystalline diamond surface

What to know before buying

Listing details to confirm

The listing describes this as an 8-inch stone, while its dimensions are given as 20.3L x 7.6W x 1H centimetres, so confirm that the listed measurements suit your setup. The listing also calls the material “Synthetic” while describing a monocrystalline diamond surface, and it gives no specific warranty conditions despite a separate lifetime warranty claim.

Who is it for?

A good fit for

  • Knife owners looking to restore neglected edges with a coarse diamond stone.
  • Woodworkers or other tool users seeking a continuous surface for chisels and similar edges.

Less suited to

  • Buyers who need a fine-grit finishing surface in the same stone.
  • Anyone choosing solely by nominal 8-inch length who requires the listed dimensions to match a particular work area.
DMT D8C 8-Inch Coarse Diamond Sharpening Stone · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 879 ratings
  • 5 stars72%72%
  • 4 stars14%14%
  • 3 stars6%6%
  • 2 stars2%2%
  • 1 star6%6%

Customer feedback reports positive impressions of stone quality and sharpening effectiveness, while durability, value, sharpening quality and flatness draw mixed opinions. For buyers considering this coarse, continuous-surface stone for edge restoration, the reports are encouraging but do not settle how consistent its flatness or long-term performance will be.

Positive themes

  • Customers describe the stone quality positively and report effective sharpening.

Mixed feedback

  • Feedback is mixed on durability, value, sharpening quality and flatness.

Frequently asked questions

What grit is the DMT D8C?

The supplied product details identify it as coarse and state 45 micron / 325 mesh.

Can it be used without oil?

The manufacturer says it can be used dry or with water and does not require oils or sharpening compounds.

Does it include non-skid feet?

The manufacturer claims non-skid rubber feet are included, but no explicit package inventory was supplied, so check the selected listing.

DMT D8C 8-Inch Coarse Diamond Sharpening Stone · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
SHOWA Atlas CS720 Chemical-Resistant Nitrile Gloves, Large
SHOWA Atlas CS720 Chemical-Resistant Nitrile Gloves, Large

C$70.16

C$60.19

-14%
-14%
Product details in Markdown