1 / 7Deeplee PLA Matte 2.0 3D Printer Filament, 1.75 mm, 4 kg
Deeplee PLA Matte 2.0 is a 4 kg bundle of 1.75 mm PLA filament in black, white, grey and beige, aimed at FDM printing where a matte surface is wanted. The listing claims a plastic spool, vacuum-sealed 1 kg spools and compatibility with most 1.75 mm FDM printers, but its claimed strength and print behaviour are not independent test results.
At a glance
- Matte finish is presented as a way to reduce the visibility of layer lines on display prints.
- The listing recommends generic PLA profiles and provides nozzle, bed and speed guidance.
- The manufacturer claims compatibility with most 1.75 mm FDM printers and names several multi-filament systems.
Pros and cons
Pros
- Four listed colours and 4 kg total suit buyers planning varied or repeated matte PLA prints.
- The listing provides recommended temperature and speed ranges, giving a starting point for printer setup.
- Customers report positive experiences with print quality, colour, finish and compatibility.
Technical specifications
11 specifications| Brand | Deeplee |
|---|
| Weight listed | 4 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Material listed | Polylactic Acid |
|---|---|
| Colours listed | Matte 2.0 Black/White/Grey/Beige 4kg |
| Recommended nozzle temperature | 190-220°C |
|---|---|
| Recommended bed temperature | 35-65°C |
| Recommended speed | ≤250mm/s |
| Diameter tolerance claim | 1.75mm ± 0.02mm |
| Tensile strength claim | 45 MPa |
| Impact resistance claim | 2× the impact resistance of ordinary matte PLA |
What to know before buying
- The listed tensile strength, impact resistance, diameter tolerance, compatibility and print guidance are manufacturer claims, not independently verified performance guarantees. Confirm the selected printer's filament requirements and adjust settings if needed.
Who is it for?
A good fit for
- FDM printer owners who use 1.75 mm PLA and want a multi-colour matte filament bundle.
- Makers printing miniatures, cosplay props, architectural models or display pieces where a matte appearance is desirable.
Less suited to
- Buyers who need a verified strength rating or printer-specific performance guarantee.
- Printers that do not accept 1.75 mm PLA filament.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
9% 9% - 3 stars
5% 5% - 2 stars
3% 3% - 1 star
8% 8%
Customer feedback reports positive impressions of print quality, general quality, compatibility, colour and finish. Some experiences with tangling and bed adhesion are mixed, so these may matter during longer prints or when setting up a new material. The listing's neat-winding and compatibility claims do not guarantee those outcomes for every spool or printer.
Positive themes
- Customers report good print quality and overall filament quality.
- Customers report satisfaction with colour, finish and compatibility.
Mixed feedback
- Customer feedback is mixed on tangling and adhesion.
Frequently asked questions
What type of filament is this?
The listing identifies it as Polylactic Acid (PLA) filament with a 1.75 millimeter diameter, for FDM 3D printers.
Which colours are listed?
Black, white, grey and beige are named in the colour details.
What print settings does the listing recommend?
It recommends a nozzle temperature of 190-220°C, a bed temperature of 35-65°C and a speed of ≤250mm/s. Treat these as starting guidance and follow your printer's requirements.
Does the listing claim support for multi-filament systems?
Yes. It claims compatibility with Bambu Lab AMS, Creality ACE and most filament management systems, but that compatibility is not independently verified.

Alternative options

DEEPLEE Matte PLA Filament 1.75mm, 4KG, Matte Black *2/Matte White *2 | Matt Surface, Low Warping, +/- 0.02mm, Plastic Spool, No Clogging, Higher Toughness
$51.99

DEEPLEE PLA PRO Filament 1.75mm, Stronger Toughness 3D Printer Filament, PLA Filament Dimensional Accuracy ±0.02 mm, Fits Most FDM 3D Printer, White 4kg
$54.99

DEEPLEE PLA+ 2.0 Filament 1.75mm, Upgraded PLA Plus Filament, White, 4KG | White Bundle, PLA Plus Upgraded, No Clogging, Higher Toughness, Dimensional Accuracy +/- 0.02mm
$47.49

ELEGOO Rapid PLA Plus 3D Printer Filament 1.75mm Black 4KG | PLA+ Max600mm/s High Speed Printing, Toughness, Highly Fluid Printing, Dimensional Accuracy +/- 0.02mm
$53.54

TINMORRY Matte PLA Filament 1.75mm, PLA 3D Printing Filament, Compatible with Bambu Lab FDM 3D Printer, 1 KG 1 Spool, Matte Olive Green
$24.99

ELEGOO PLA+ Filament 1.75mm Black 2KG 3D Printer Filament | PLA Plus, Dimensional Accuracy +/- 0.02mm, Tough & High Strength, Fit for Most FDM Printers(1KG/Spool, 2.2lbs)
$33.14

DEEPLEE PLA 3D Printer Filament 1.75mm, White, 1KG | Neatly Wound, Tangle-Free Winding, +/- 0.02mm, Clog & Bubble-Free, Cardboard Spool, Eco-Friendly
$20.99

ELEGOO PLA+ 3D Printer Filament 1.75mm White 4KG | High Toughness PLA Plus, Dimensional Accuracy +/- 0.02mm, 4pcs 1kg Spools, Fits for Most FDM 3D Printers
$49.29

GIANTARM PLA 3D Printer Filament, Blue PLA Filament with 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging, for Most 3D FDM Printer (PLA-New Blue)
$25.99

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Cotton White | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

Polymaker PLA Pro 3D Printing Filament Black 1KG, High-Impact Tough PLA, Fast Printing up to 300mm/s, Easy to Print, No Enclosure Required, High Speed New Formula, Formerly Polysonic PLA Pro
$21.11

Polymaker HT-PLA Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$24.63