
Deeplee DP-PM016 Matte PLA Filament, 1.75 mm, Ruby Red, 2 kg
Deeplee DP-PM016 matte PLA filament is listed as a 2 kg ruby-red bundle for 1.75 mm FDM printers. Its non-glossy finish is aimed at decorative prints, prototypes and architectural models, while customer feedback is mixed on tangling and bed adhesion.
At a glance
- Matte surface is described as non-glossy and intended to reduce glare.
- The listing claims a 1.75 mm filament diameter with +/- 0.02 mm dimensional accuracy.
- Listed uses include prototypes, architectural models and decorative prints.
- Compatibility is claimed for common 1.75 mm FDM printers.
Pros and cons
Pros
- A matte finish can suit models where a low-gloss appearance is preferred.
- The stated 2 kg total can support longer print runs than a smaller spool, if the selected package matches the title.
- Customer feedback highlights print quality, colour and finish, alongside positive reports of compatibility.
Technical specifications
8 specifications| Brand | Deeplee |
|---|---|
| Model | DP-PM016 |
| Material listed | Polylactic Acid |
|---|---|
| Filament diameter | 1.75 millimeters |
| Weight listed | 2.4 kg |
| Colour | 2kg Ruby Red |
| Dimensional accuracy claim | +/- 0.02 mm |
|---|---|
| Additional feature | Matte Finish |
What to know before buying
Listing details to confirm
The listing's title says 2 kg, while the colour field says "2kg Ruby Red" and the item-count fields indicate two items, without clarifying whether this is one spool or two, verify the selected package and spool arrangement before ordering. The listed product weight is 2.4 kg, which is distinct from the stated filament amount. Tangling and adhesion experiences are mixed in customer feedback, so spool handling and bed setup may matter.
Who is it for?
A good fit for
- FDM printer owners who need 1.75 mm PLA and prefer a ruby-red matte finish.
- Makers printing decorative objects, prototypes or architectural models.
Less suited to
- Buyers who need glossy filament or a clearly specified spool count without confirming the bundle details.
- Printers that do not support 1.75 mm filament.
Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
9% 9% - 3 stars
5% 5% - 2 stars
3% 3% - 1 star
8% 8%
Customer feedback reports positive impressions of print quality, colour, finish and compatibility, with customers also describing the filament as good quality. Opinions are mixed on tangling and adhesion. For buyers choosing this 1.75 mm matte PLA for decorative prints or prototypes, the finish feedback is relevant, while spool handling and bed adhesion may vary in practice.
Positive themes
- Customers report good print quality and are pleased with the colour and finish.
- Feedback describes compatibility positively.
Mixed feedback
- Customer opinions are mixed on tangling and adhesion.
Frequently asked questions
What printer size does this filament fit?
The listing specifies 1.75 millimeters and claims compatibility with common 1.75 mm FDM printers. Confirm your printer's required filament diameter.
Is the finish glossy?
No. The listing describes a matte, non-glossy finish, intended to avoid glare.
Does the listing confirm one 2 kg spool?
No. The title states 2 kg, but the listing also indicates two items and does not clearly state the spool arrangement. Check the selected listing for package details.
Alternative options

DEEPLEE Matte PLA Filament 1.75mm, 4KG, Matte Black | Matt Surface, Low Warping, +/- 0.02mm, Plastic Spool, No Clogging, Higher Toughness
$51.99

Polymaker HT-PLA Filament 1.75mm Red 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$21.99

Polymaker PLA Pro Filament 1.75mm 1KG Light Red, High-Impact Resistance | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$26.99

ELEGOO PLA Matte 3D Printer Filament Ruby Red 1KG 1.75mm | Rich Matte Color, Less Visible Layer Lines, Dimensional Accuracy +/- 0.02mm, Easy Installation, 1kg Reusable Spool
$24.99

ELEGOO Matte PLA 3D Printer Filament Ruby Red 1KG 1.75mm | Dimensional Accuracy +/- 0.02mm, 1kg Carboard Spool (2.2lbs) for Most FDM 3D Printers
$24.99

ELEGOO PLA Filament 1.75mm Red 1KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament, Fits for Most FDM 3D Printers
$22.49

Colourbing Pre-Dried Silk PLA+ 3D Printer Filament 1.75mm, Neatly Wound & Shiny Glossy Color, Smooth Printing PLA+ Filament Ideal for Christmas Decorations, Fit for Most FDM 3D Printer, 1KG Spool- Red
$23.99

JUSTMAKER ABS Matte 3D Printer Filament, Upgraded Strength Heat Resistant Filament, Matte Surface with Cardboard Spool, Dimensional Accuracy +/-0.03mm, 1.75mm, 1 kg (2.2 lbs), Red
$15.19

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Cotton White | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

DEEPLEE Matte PLA Filament 1.75mm, 4KG, Matte Black *2/Matte White *2 | Matt Surface, Low Warping, +/- 0.02mm, Plastic Spool, No Clogging, Higher Toughness
$51.99

Polymaker HT-PLA Filament 1.75mm Blue 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$20.23

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Army Red | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$20.69