1 / 7DAYUAN YT- 98782 Pneumatic Injector Puller Set
DAYUAN YT- 98782 is a pneumatic injector puller set that uses air-powered vibration to help extract tight or seized injectors. Its adapter selection and stated working-pressure range may suit workshop use, but matching the adapter to the injector is important.
At a glance
- Air-powered vibration is intended to assist with removing tight or seized injectors.
- The listing says pneumatic force can be used without inertia hammers or mechanical extractors.
- A set of listed thread adapters is intended to fit a variety of injectors.
Often bought together
Pros and cons
Pros
- Pneumatic operation offers an alternative to using an inertia hammer or mechanical extractor.
- The listed adapter sizes give buyers several thread options to compare with their injector.
Technical specifications
6 specifications| Brand | DAYUAN |
|---|---|
| Model | YT- 98782 |
| Working pressure | 72-116 psi (5-8 bar) |
|---|---|
| Stated torque | 20-30Nm |
| Adapter sizes | M20*1.0, M18*0.75, M17*1.0; M8*1.25, M8*1.0, M8*1.5 , M14*1.5, M16*1.5, M18*1.5, M20*1.5, M22*1.5; M25*0.5, M25*1.0; M26*0.75, M29*1.0, M31*0.75; M27*0.75, M27*1.0 |
|---|
| Weight listed | 6.34 kg |
|---|
What to know before buying
- Customer feedback reports fit problems for some injectors, including a report that the M25 x 0.5 adapter was too wide for Denso injectors. Confirm the required thread and adapter fit before relying on this set.
Who is it for?
A good fit for
- Automotive technicians or experienced DIY users who already have an air supply within the stated working-pressure range.
- Buyers removing injectors whose thread and fit have been checked against the included adapter sizes.
Less suited to
- People without access to a suitable compressed-air supply.
- Buyers who need confirmed compatibility with a specific injector but have not verified its adapter fit.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
10% 10% - 3 stars
5% 5% - 2 stars
2% 2% - 1 star
8% 8%
Customer feedback describes the tool as useful for quick injector removal and often regards its value positively, while also reporting fit concerns, including an adapter that did not suit a Denso injector. The adapter list provides several thread options, but it does not guarantee a match for a particular injector, so confirm fit before choosing it for a specific job.
Positive themes
- Customers describe effective, quick injector removal.
- Feedback includes positive comments about quality and value.
Negative themes
- Some customer feedback reports adapter-fit problems, including an M25 x 0.5 adapter that was too wide for Denso injectors.
Frequently asked questions
What air pressure does the DAYUAN YT- 98782 require?
The listing states a working pressure of 72-116 psi (5-8 bar). Check that your air supply can operate within this range.
Does the set fit every injector?
The listing describes compatibility with a variety of injectors, but does not establish universal fit. Compare the injector's thread and dimensions with the adapter list, and note customer reports of fit issues with some injectors.
Does the tool use a slide hammer?
The listing describes pneumatic vibration and says it can extract injectors without inertia hammers or mechanical extractors.

Alternative options

ReluxGo Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter, BJS071
$24.99

Fuel Injector Remove Tool Kit T10133 Seal Installer Compatible with VW 1.2, 1.4, 1.6, 1.8, 2.0, 2.7, 3.0, 3.2, 3.6 V6 4.2 V8 FSI TSI TFSI Petrol, Replacement for Porsche 2.7, 3.0 Injector Puller
$79.00

DAYUAN Pneumatic Air Power CV Joint Boot Expander Installation Removal Tool | Fits 20-115mm Most Flexible Rubber CV Boots & Steering Boots,110 Psi Max,Not For Rigid PVC or Low-Elasticity Boots
$66.97

ReluxGo Inner CV Axle Puller Removal Tool with 5/8"-18 Slide Hammer & Adapter, Slide Hammer Attachment Bearing Puller Set with 63mm 48mm CV Joint Fork Adapter, Front Wheel Drive Axle Pulley Attachment
$75.99

DPTOOL Diesel Fuel Injector Puller Removal Tool Kit and Slide Hammer | Bearing Extractor Set with M8-M22 Adapters U-Shaped and 2 Jaw Injector Puling Tool
$129.04

Colinktool 09521-25011 Truck Rear, Rear Axle Shaft Bearing Puller | Rear Axle Bearing Puller Tool for Trucks
$235.99

Archoil Diesel Fuel System Kit - AR6400-D (12 oz) + AR6500 (40 oz) - Complete Restoration For All Diesel Engines, Injector Cleaner, Lubricity Improver, DPF & Turbo Deposit Control, Cetane Booster
$87.90

DAYUAN Fuel Injection Pressure Tester Kit, 0-140 PSI Dual Scale Gaug | Fits Most Gasoline Vehicles, Pressure Relief Valve, Shockproof Gauge, Adapters & Hoses Included, Storage Case
$86.97

ReluxGo Inner CV Axle Removal Tool 48mm with Nut, Front Wheel Drive Axle Pulley Attachment, Fits Slide Hammers with 5/8"-18 Threads, CV Joint Axle Removing Tool
$28.99

DPTOOL Inner CV Joint Puller Removal Tool Slide Hammer CV Axle Puller Set | Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter
$139.00

Fuel Injector Removal Puller Kit Injector Seal Install Tool Compatible with Volkswagen TDi 4 Cyl 8V 16V Diesel Compatible with Audi VW 1.2 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI TFSI Petrol
$89.00

AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2"))…
$135.99
