1 / 7DAOKAI JA-DA-057 MiCS-5524 Gas Sensor Module
The DAOKAI JA-DA-057 MiCS-5524 gas sensor module is an analog breakout for hobby experiments with gas sensing. It requires 5 V DC and provides an analog output, but the listing says it cannot identify which gas triggered a response.
At a glance
- Analog output is intended to be read from the output pin after powering the module with 5 V DC.
- The listing describes sensitivity to carbon monoxide, ammonia, ethanol, hydrogen, methane, propane and butane, but says the module cannot distinguish which gas was detected.
- The manufacturer says gas sensors require calibration for accurate output.
- Listed for hobby education and experimentation, not safety, medical or finished-product use.
Reference price: $19.99
Price checked: Nov 17, 2026
View offerAhead of Black FridayExplore the selectionPros and cons
Pros
- Analog output supports microcontroller projects that can read an analog input.
- The listing names several gas responses and supplies ranges for CO, ethanol, hydrogen, ammonia and methane.
- The manufacturer describes connections for Arduino, ESP8266 and Raspberry Pi projects.
Cons
- It cannot identify which gas caused the response, limiting use where gas-specific readings are needed.
- It is not intended or guaranteed for safety, medical or finished-product applications.
Technical specifications
10 specifications| Brand | DAOKAI |
|---|---|
| Model | JA-DA-057 |
| Supply voltage | 5 volts |
|---|---|
| Current rating | 1 A |
| Mounting type listed | Surface Mount |
| Carbon monoxide (CO) | 1 - 1000ppm |
|---|---|
| Ethanol (C2H5OH) | 10 - 500ppm |
| Hydrogen | H21 - 1000ppm |
| Ammonia (NH3) | 1 - 500ppm |
| Methane (CH4) | more than 1000ppm |
What to know before buying
Listing details to confirm
The listing details are inconsistent: its current rating is given as 1 A, while the description says the powered heater consumes approximately 25-35mA. Its hydrogen range is written as “H21 - 1000ppm,” and the header-plus-cable package claim is not confirmed by the separate included-components detail. Treat the stated gas ranges as listing claims and check the selected kit contents.
What’s in the box
- MiCS-5524 gas sensor moduleIncluded
- 4-pin headerCheck selected pack
- 4 male and female cablesCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Hobbyists prototyping analog gas-sensing experiments with a 5 V supply.
- Arduino, ESP8266 or Raspberry Pi projects with a compatible analog input.
Less suited to
- Safety alarms, gas-leak protection, medical devices or finished products.
- Applications that require the sensor to identify a specific detected gas.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
10% 10% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
19% 19%
Aggregate ratings are mostly five-star, but some one-star ratings are also present. With a small rating sample and no written feedback supplied, the figures do not explain user experiences or establish how well it performs. For a hobby project, the key practical constraints remain the analog-only output, inability to identify the gas, and calibration requirement stated by the manufacturer.
Frequently asked questions
Can this module identify the gas it detects?
No. The listing says it is sensitive to several gases but cannot tell which gas was detected.
How does the module connect to a project?
The listing says to supply 5 V DC and read the analog output pin. It names Arduino, ESP8266 and Raspberry Pi applications, but the receiving board must support a compatible analog input.
Is this suitable for a gas alarm or safety device?
No. The manufacturer limits the breakout board to hobby education and experimentation and says it is not for safety, medical or finished-product use.
Does it need calibration or warm-up?
The description says gas sensors require calibration for accurate output and advises allowing the heater to warm before taking a reading.

Alternative options

DKARDU 1 pcs MiCS5524 CO Alcohol and VOC Gas Air Quality Sensor Analog Sensor Breakout Board with Dupont Cable for Arduino Raspberry Pi
$18.59

TopTes Guard-863Pro 4 Gas Monitor Multi Gas Detector for H₂S, CO, LEL, and O₂, with TFT Color Screen, Upgraded O₂ Sensor (5-Year Lifespan), USB Data Export, 18h Battery Life, Reliable for Work & Home
$219.99

GoveeLife Smart Air Quality Monitor with PM2.5 H5106, LED Display Wired | Indoor temperature humidity sensors, 2s refresh, 2-year data storage, for home & office, 2.4G Wi-Fi only
$54.99

DEVMO PM Sensor SDS011 High Precision PM2.5 Air Quality Detection Sensor Module Super Dust Sensors Digital Output Compatible with Ar-duino
$59.99

1PCS MQ-137 MQ137 Sensor Module
$44.00

1 PCS LD2410C Sensor Module HLK-LD2410 Human Presence Radar LD2410 Millimeter Wave Radar Sensor Module Non Contact 24GHz ISM Band Serial Port IO Level Output
$14.99

BREATHE Smart Air Quality Monitor Indoor, CO2 Detector for Home, PM2.5 VOC | PM2.5 Air Quality Monitor, VOC Air Quality Monitor, NDIR CO2 Monitor for Home, Formaldehyde Detector, CSV Export
$169.99

Ganasome 2pcs High Sensitivity Sound Microphone Sensor Module for Arduino AVR PIC
$13.50

1Pack Total 9PCS MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module Kit
$24.99

ENS160+AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality and Temperature and Humidity Sensor Replace CCS811 for Arduino
$17.99

DKARDU ENS160+AHT21 Temperature and Humidity Sensor Carbon Dioxide CO2 eCO2 TVOC Air Quality Module 3 in 1 Sensor High-Precision with Dupont Cable,for Arduino
$18.49

1Pc MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module for Arduino Raspberry Pi ESP8266 MQ2 5V DC,Indoor Air Quality Meters Airflow and Air Quality
$6.98
Products with discounts that might interest you
Offer details
- Allow the heater to warm before taking a reading, as directed in the description.
- Use calibration for accurate output, as stated by the manufacturer.















