Loonie PerksDeals for Canada
BlogSearch
Product guide

Brush Research Flex-Hone GBD51232, 5-1/2 in, 320-Grit Silicon Carbide

Brush Research Flex-Hone GBD51232 is a 5-1/2-inch, 320-grit silicon carbide hone listed for mild steel, stainless steel, cast iron and softer ferrous materials. Its flexible nylon filaments carry bonded abrasive globules, and the manufacturer describes it for finishing and cross-hole deburring in compatible rotating equipment.

At a glance

  • The manufacturer describes the tool as intentionally oversized to apply pressure inside a cylinder wall and self-centre, self-align and compensate for wear.
  • Abrasive globules bonded to flexible nylon filaments are intended to create a crosshatch finish and support finishing and deburring in one setup.
  • Listed for use with a hand drill, drill press or CNC equipment, subject to suitable spindle and workpiece fit.
  • The manufacturer states a typical finish of 18 - 30 Microinch (.5 - .7 Micrometer).
Price
$229.67Save 15%

Reference price: $271.07

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • A 320-grit silicon carbide abrasive is specified for several ferrous materials, including stainless steel and cast iron.
  • The described cross-hole deburring and finishing use can combine two operations in one setup.
  • Use with several types of rotating spindle equipment is stated.

Technical specifications

12 specifications
Identity
BrandFlex-Hone
ModelGBD51232
Dimensions and installation
Diameter5.5 inches
Dimensions listed44.5 x 20.3 x 14 centimetres
Weight listed708 g
Abrasive and construction
MaterialSilicon Carbide
Grit number320
Grit typeExtra Fine
Bristle typeAbrasive Globule Bonded To Flexible Nylon Filament
ColourGray
Use and compatibility
Recommended usesDeburring, Finishing, Grinding
Compatible materialsOther Softer Ferrous Materials, Stainless Steel, Mild Steel, Cast Iron

What to know before buying

Listing details to confirm

The listing identifies a 5-1/2-inch (140mm) diameter in the title and package description, while the structured diameter field says 5.5 inches. Dimensions and weight also appear with slightly different precision in separate listing fields, so confirm fit-critical measurements before purchase. The typical finish figure is a manufacturer claim, not a guaranteed result.

What’s in the box

Included
  • Brush Research GBD51232 FLEX-HONE®, 5-1/2" (140mm)

Who is it for?

A good fit for

  • Metalworking or cylinder-finishing tasks on mild steel, stainless steel, cast iron or other softer ferrous materials, when the listed diameter and grit suit the job.
  • Buyers seeking a flexible hone described for cross-hole deburring and finishing with compatible drill, drill press or CNC equipment.

Less suited to

  • Workpieces requiring a diameter other than the listed 5-1/2-inch size or a different abrasive grit.
  • Buyers seeking an abrasive specified for materials beyond the listed ferrous materials.
Brush Research Flex-Hone GBD51232, 5-1/2 in, 320-Grit Silicon Carbide · photo 2
Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 8 ratings
  • 5 stars83%83%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star17%17%

Only aggregate rating information is supplied, with ratings concentrated at five stars but also including one-star ratings. This small rating sample cannot establish why customers were satisfied or dissatisfied, so it offers little guidance on finish quality or suitability for a particular workpiece. Match the specified abrasive, material and diameter to the job.

Frequently asked questions

What materials is the GBD51232 listed for?

The listing specifies mild steel, stainless steel, cast iron and other softer ferrous materials.

What grit and abrasive does it use?

It is listed as 320 grit with silicon carbide abrasive, and its grit type is described as Extra Fine.

What equipment can it be used with?

The manufacturer says it can be used with a hand drill, drill press or CNC equipment. Confirm the setup and workpiece are compatible with the listed tool diameter.

What finish does the manufacturer say it typically achieves?

The listing states 18 - 30 Microinch (.5 - .7 Micrometer) as a typical finish. This is a manufacturer claim, not a guaranteed outcome.

Brush Research Flex-Hone GBD51232, 5-1/2 in, 320-Grit Silicon Carbide · photo 3
Additional product photo 3

Alternative options

Product details in Markdown