Loonie PerksDeals for Canada
BlogSearch
Product guide

ARCCAPTAIN iControl CUT55 Pro 55A Plasma Cutter

ARCCAPTAIN iControl CUT55 Pro is a plasma cutter listed with 55A output and 120V/240V input. App-based parameter adjustment, a non-contact pilot arc and automatic post-blow settings add control features, while the listed clean and maximum cut thicknesses should be treated as separate targets.

At a glance

  • App claims include parameter changes, monitoring and status detection from up to 50 metres away.
  • A pre-installed air regulator and filter are described for setup and air-pressure adjustment.
  • Non-contact pilot arc is intended for starting cuts without torch contact with the workpiece.
  • 2T and 4T modes offer different trigger operation, with post-blow time set by current range.
Price
$359.99Save 27%

Reference price: $489.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • App control provides a way to adjust settings and check status remotely, according to the listing.
  • The non-contact pilot arc is described for cutting surfaces with dirt, rust or coatings.
  • The package list names a torch, air hose, earth clamp and 120/240V power adapter.

Cons

  • The listed quality cutting thickness is 12 mm, below the stated 20 mm maximum, so the maximum should not be assumed to describe routine clean cuts.

Technical specifications

16 specifications
Identity
BrandARCCAPTAIN
ModelCUT55 Pro
Rated current in title55Amp
Voltage in title120V/240V
Cutting and controls
Quality cutting thickness12mm (1/2")
Maximum cutting thickness20mm (3/4")
App control rangeup to 50 meters
Torch modes2T/4T
Post-blow settingsCutting current 20-34A, post-blow time 5s; Cutting current 35-45A, post-blow time 8s; Cutting current 46-55A, post-blow time 10s
Arc starthigh frequency non-touch arc starting mode
Power and battery
Power configurationdc
Dimensions and installation
Weight listed8.82 kg
Parcel dimensions49.53 x 39.37 x 20.32 cm; 8.82 kg
Materials and protection
Material listedalloy steel, stainless steel, mild steel, copper, aluminum
Protection features claimedVRD function, fault alarms, and protection against overcurrent, overvoltage, overload, and overheating
Certifications claimedTÜV and ANSI

What to know before buying

Listing details to confirm

The 12 mm quality and 20 mm maximum cutting figures are different claimed limits. The listing also claims 55A and dual-voltage operation, but gives no detailed performance conditions for either cutting figure, such as material or input voltage. Confirm suitability for the intended material and supply.

What’s in the box

Included
  • 10FT AG60 Cutting Torch (1)
  • 10FT Air Hose (1)
  • 10FT Earth Clamp (1)
  • Power adapter
  • ARCCAPTAIN Plasma Cutter (1)

Who is it for?

A good fit for

  • Buyers seeking a dual-voltage plasma cutter with app-based adjustment and status monitoring.
  • Metalworkers who want a non-contact pilot arc and selectable 2T/4T operation.
  • Users considering cuts up to the listing's stated 12 mm quality thickness, with the stated 20 mm maximum treated as a separate limit.

Less suited to

  • Buyers who need a verified clean-cut result at 20 mm thickness.
  • Anyone requiring independently confirmed durability, electrical compatibility or cutting performance.
ARCCAPTAIN iControl CUT55 Pro 55A Plasma Cutter · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 560 ratings
  • 5 stars73%73%
  • 4 stars13%13%
  • 3 stars4%4%
  • 2 stars3%3%
  • 1 star7%7%

Customer feedback highlights reports of effective cutting and ease of use, alongside concerns about durability and mixed impressions of quality and power. Some customers report failures within a few months or breaker trips, but the feedback does not establish how common these outcomes are or their causes. For buyers considering the claimed 55A cutter, the mixed power feedback makes matching the machine to the available supply and intended work especially important.

Positive themes

  • Customers report that it cuts effectively, including steel.

Negative themes

  • Some customers report durability problems, including failures within a few months.

Mixed feedback

  • Feedback on overall quality and power is mixed.

Frequently asked questions

What cutting thickness does the listing claim?

It states 12 mm (1/2 inch) for quality cutting and 20 mm (3/4 inch) maximum. These are distinct claims, and the maximum should not be read as a clean-cut rating.

Does the CUT55 Pro support app control?

The listing claims app-based parameter adjustment, real-time monitoring and status detection from up to 50 metres away.

What comes in the listed package?

The manufacturer contents list names one 10-foot AG60 cutting torch, one 10-foot air hose, one 10-foot earth clamp, one 120/240V power adapter and one ARCCAPTAIN plasma cutter.

What do 2T and 4T modes do?

The listing describes 2T for flexible cutting and 4T to help reduce fatigue during prolonged operation. It does not provide further operating instructions here.

ARCCAPTAIN iControl CUT55 Pro 55A Plasma Cutter · photo 3
Additional product photo 3

Alternative options

Product details in Markdown