Loonie PerksDeals for Canada
BlogSearch
Product guide

ANYCUBIC Water Washable ABS-Like Resin 3.0, Clear, 1kg

ANYCUBIC Water Washable ABS-Like Resin 3.0 is a clear, 1kg photopolymer resin for compatible 3D printers. Its water-rinse post-processing and stated toughness may suit buyers making detailed parts or figures, while printer compatibility and the claimed material performance should be considered against your workflow.

At a glance

  • The listing says residual resin can be rinsed with plain water, simplifying the stated post-processing method.
  • The manufacturer claims 86D Shore hardness and up to 40% elongation at break, with drilling and tapping cited as supported operations.
  • A stated 4% volume shrinkage rate is presented as supporting detailed reproduction and fitted parts.
  • Listed for LCD and DLP printers using 405nm UV curing.
Price
$30.79Save 12%

Reference price: $34.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • Water-rinse cleanup is a practical alternative to a post-processing routine that relies on another cleaning liquid, according to the listing.
  • The stated toughness properties are relevant for buyers printing parts that may need drilling, tapping or careful support removal.
  • The 405nm LCD/DLP compatibility claim covers multiple printer types.

Technical specifications

9 specifications
Identity
BrandANYCUBIC
Material and compatibility
ColourClear
Size1kg
Curing compatibilityvarious LCD/DLP 3D printers on the market that utilize 405nm UV light curing technology
Claimed material properties
Shore hardness86D
Maximum elongation at break40%
Volume shrinkage rate4%
Dimensions and installation
Dimensions listed27 x 11 x 11 cm; 1.05 kg
Weight listed1.05 kg

What to know before buying

  • The water-washable formula still involves uncured resin and post-processing. Follow the resin and printer manufacturers' handling and curing instructions, and verify that your printer uses 405nm UV curing.

Who is it for?

A good fit for

  • Resin-printer users seeking a clear, water-washable ABS-like formulation in a 1kg size.
  • Makers printing detailed models or parts where the listed toughness and dimensional-accuracy claims matter.

Less suited to

  • Users of printers that do not use compatible 405nm UV curing technology.
  • Buyers who need independently verified performance data, since the hardness, elongation, shrinkage and workflow claims are listing claims.
ANYCUBIC Water Washable ABS-Like Resin 3.0, Clear, 1kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.9 / 5 · 24 ratings
  • 5 stars92%92%
  • 4 stars8%8%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Aggregate ratings are strongly positive, with five-star ratings predominant among a relatively small number of ratings. They do not identify particular customer experiences or establish performance reasons, so treat them as a limited signal rather than confirmation of the stated washability, toughness or printer compatibility.

Frequently asked questions

Can this resin be cleaned with water?

The listing says residual resin can be rinsed off with plain water. Follow the product's handling and post-processing instructions for uncured resin and printed parts.

Which printers is it listed as compatible with?

The listing names LCD and DLP printers that use 405nm UV light curing. Check your printer's resin specifications before buying.

What material properties does the listing state?

It lists 86D Shore hardness, a maximum elongation at break of 40% and 4% volume shrinkage. These are manufacturer claims, not independent measurements.

ANYCUBIC Water Washable ABS-Like Resin 3.0, Clear, 1kg · photo 3
Additional product photo 3

Alternative options

Product details in Markdown