Loonie PerksDeals for Canada
BlogSearch
Product guide

ANYCUBIC Cool Plate for Kobra 3 and Kobra 3 V2, 250 × 250 mm

ANYCUBIC Cool Plate is a replacement print surface listed for Kobra 3 and Kobra 3 V2 printers. Its treated surface is claimed to support PLA adhesion at 45℃ and produce a matte first layer, with a low-temperature design intended to use less electricity than standard plates.

At a glance

  • The manufacturer claims the surface is treated for PLA adhesion at 45℃, with reduced risk of warping and bottom-layer separation.
  • A matte first layer is claimed, with less light reflection and a texture intended to blend with the print.
  • The listing says to select cool plate in the slicer and re-level after installing the plate.
  • Water rinsing is recommended for maintenance, while organic solvents, especially acetone, should be avoided.
Price
$14.95Save 12%

Reference price: $16.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • The listed 250x250mm size and stated compatibility target Kobra 3 and Kobra 3 V2 owners.
  • The claimed low-temperature PLA adhesion may suit users seeking a cool-plate setup rather than a standard plate.
  • The water-rinse care instructions are straightforward.

Cons

  • The listed surface compatibility is limited to PLA, so buyers using other filament types should confirm suitability before purchase.

Technical specifications

8 specifications
Identity
BrandANYCUBIC
Part numberS010326-2
Dimensions and installation
Plate size250x250mm
Weight listed400 g
Installation noteAfter installing the print bed, please re-level it to improve the printing effect.
Use and care
Compatible printers listedAnycubic Kobra 3/Kobra 3 V2
Claimed adhesion temperature45℃
Care instructionsrinse with water for maintenance, and avoid organic solvents (especially acetone) to protect the plate’s surface

What to know before buying

Listing details to confirm

The title mentions adhesive, but the care instructions say no adhesive is needed. The claimed 250x250mm plate size also differs from the parcel dimensions of 33 x 29 x 2 cm, which are package dimensions rather than confirmed plate dimensions. Confirm the selected listing’s plate size and what adhesive, if any, is supplied. Re-level the bed after installation, choose cool plate in the slicer, and avoid organic solvents, especially acetone.

What’s in the box

Included
  • Cool Plate

Who is it for?

A good fit for

  • Kobra 3 or Kobra 3 V2 owners looking for a 250x250mm cool plate listed for their printer.
  • PLA users interested in a claimed matte first layer and lower-temperature adhesion.

Less suited to

  • Buyers who need confirmed support for filaments other than PLA.
  • Buyers who need a stated energy-saving measurement or independently verified durability figures.
ANYCUBIC Cool Plate for Kobra 3 and Kobra 3 V2, 250 × 250 mm · photo 2
Additional product photo 2

Frequently asked questions

Which printers is this plate listed for?

The listing names the Anycubic Kobra 3 and Kobra 3 V2. Confirm the plate size against your printer before ordering.

Does it need adhesive?

The title says “with Adhesive,” while the care instructions say no adhesive is needed. The listing does not clearly establish whether adhesive is included, so check the selected listing.

What care does the manufacturer recommend?

The instructions say to rinse it with water and avoid organic solvents, especially acetone. They also say to re-level the bed after installation.

ANYCUBIC Cool Plate for Kobra 3 and Kobra 3 V2, 250 × 250 mm · photo 3
Additional product photo 3

Alternative options

Product details in Markdown