1 / 3Ampper Am-CBT1104 Copper Top-Post Battery Terminal Set
Top-Post: Ampper Am-CBT1104 is a pair of turned copper battery terminal clamps for standard SAE top posts. Its stated compatibility with 4- and 2-gauge battery cable and the included covers and heat-shrink tubing make it a replacement option when the cable and post dimensions match.
At a glance
- Positive and negative clamps are specified for standard SAE top posts, with different listed taper sizes for each terminal.
- The listing specifies 4- and 2-gauge cable, with installation by crimping or soldering.
- Copper construction with tin coating and terminal covers and heat-shrink tubing are claimed.
Often bought together
Pros and cons
Pros
- Includes a positive and negative terminal pair for replacement rather than requiring two separate connector purchases.
- The stated cable range and crimp-or-solder installation options support common cable-end replacement work, if the cable conductor size matches.
Technical specifications
12 specifications| Brand | Ampper |
|---|---|
| Model | Am-CBT1104 |
| Battery post fit | For SAE standard top post battery: 19 mm cone/tapering positive (+) & 17 mm cone/tapering negative (-) |
|---|---|
| Cable gauge | Use with 4-2 gauge battery cable |
| Metal conductor size | 0.31" - 0.36" |
| Installation method | install by crimping or soldering |
| Terminal type | Turned type, used for standard top post terminal connect direct to battery cable. |
| Terminal material and coating | pure copper and tin coated battery terminal clamp |
|---|---|
| Listed features | Sturdiness terminal post for increased strength, excellent corrosion resistance and electrical conductivity. |
| Dimensions listed | 13.97 x 1.78 x 8.89 cm; 159 g |
|---|---|
| Weight listed | 159 g |
| Installation claim | direct fit and no modifications |
What to know before buying
- The listing describes the clamps as pure copper and tin coated, but provides no independent performance measurements. Confirm SAE post taper and cable conductor dimensions before fitting. Installation is specified by crimping or soldering.
Who is it for?
A good fit for
- Replacing corroded ends on a compatible standard SAE top-post battery.
- Buyers connecting 4- or 2-gauge battery cable who can crimp or solder the cable ends.
Less suited to
- Installations using a different battery post type or cable size than the listed fit specifications.

Customer reviews on Amazon
- 5 stars
52% 52% - 4 stars
23% 23% - 3 stars
25% 25% - 2 stars
0% 0% - 1 star
0% 0%
The supplied evidence contains aggregate ratings but no written customer feedback, so it does not establish specific praised features or reported problems. The ratings span five-, four- and three-star categories, which is a limited and mixed signal from a small sample, not a basis for predicting fit or performance. For a replacement purchase, confirm the listed SAE taper and cable dimensions directly against your setup.
Frequently asked questions
What battery posts does this set fit?
The listing specifies standard SAE top posts, with a 19 mm tapered positive post and a 17 mm tapered negative post. Check your battery dimensions before buying.
What cable sizes are listed?
The set is specified for 4- and 2-gauge battery cable, and the listing gives a metal conductor size of 0.31" - 0.36".
How are the cable ends attached?
The listing says to install by crimping or soldering. It does not specify that tools are included.

Alternative options

Battery Relocation Kit, Battery Jump Post Kit Heavy Duty Remote Battery Terminals Charging Post with Bracket Cable Compatible with UTV ATV Car Trucks RV Tractor Boat
$31.98

M8 Thread Male Brass Battery Terminal Charging Posts, Ampper M8 Battery Post Adapter (+/-) with Top Bolts for Extension, Pack of 2
$14.95

Amfuujoy 2 AWG Battery Cables 16 Inch, with 3/8" Ring Terminal & Battery Clamps, 2PCS Heavy Duty 2 Gauge Pure Copper Battery Inverter Wire Cables, for Car, RV, Truck, Marine & Solar 12V-24V
$25.98

Lead Alloy Military Spec Battery Terminal Connectors, Ampper Top Post Battery Terminals Clamp Set for Marine Car Boat RV Vehicles (1 Pair)
$14.39

Ampper Top Post Battery Disconnect Switch, 12-48 V Battery Power Cut Master Disconnect Kill Switch Isolator W/Terminal and Removable Knob for Car and More (Positive, On/Off)
$31.99

M6 Thread Brass Battery Terminal Charging Posts, Ampper Battery Post Adapter (+/-) with Solid M6 Bolts as Male Posts Direct to Battery, Pack of 2
$14.95

Aynaxcol 4PCS Battery Terminal Connectors for SAE Type A Posts | 4PCS Battery Terminal Connectors, Fits SAE Type A & JIS Type A Posts, Quick Disconnect, with Washers & Lugs
$27.99

Vgate Lead Acid Battery Terminal Clamps, 8AWG up to 4/0(XL) AWG Gauge, 12-Way Connectors, Positive and Negative (+/-)(Pair) for SAE/DIN/EN Tapered Top Post
$41.51

RED WOLF 60 Amp Circuit Breaker W/Ring Terminal 6 Gauge Connector Manual Reset Switch for Boat Trolling Motor Marine ATV Trailer Vehicles Stereo Audio Electronic Battery Solar System Inline Fuse
$24.99

QWORK Brass Marine Grade Battery Terminal Top Post, 4 Pairs Battery Terminal Connectors, Battery Terminal Clamps for Boat Car RV, Fit All Standard Top of Post Batteries, 4 Positive + 4 Negative
$23.47

Top Post Battery Disconnect Switch, Ampper Battery Master Switch Isolator W/ M8 Top Bolt for Power Disconnect Cut Off (1 Pack)
$14.39

Ampper Top Post Battery Disconnect Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator W/Positive Terminal for Car and More (Positive, On/Off)
$28.15
























