1 / 3Ampper Am-CBT1101 Copper Top Post Battery Terminal Set
Battery Terminal: Ampper Am-CBT1101 is a pair of copper, tin-coated clamps for standard SAE top-post batteries. The listing specifies a 4-gauge cable connection, protective covers and heat-shrink tubing, with cable attachment by crimping or soldering.
At a glance
- Pair includes positive and negative clamps intended for standard SAE top posts.
- The listed post tapers are 19 mm positive and 17 mm negative.
- Designed for 4-gauge battery cable, with crimp or solder installation options.
- Covers and heat-shrink tubing are listed with the set.
Often bought together
Pros and cons
Pros
- The positive and negative clamps are specified separately for standard SAE tapered posts.
- Crimping and soldering are both listed cable-attachment methods.
- Covers and heat-shrink tubing are identified as included components in the description.
Cons
- The stated 4-gauge cable fit makes this a specific cable-size choice rather than a general-purpose clamp set.
Technical specifications
7 specifications| Brand | Ampper |
|---|---|
| Model | Am-CBT1101 |
| Dimensions listed | 13.97 x 1.78 x 8.89 cm; 159 g |
|---|---|
| Weight listed | 159 g |
| Battery post fit | For SAE standard top post battery: 19 mm cone/tapering positive (+) & 17 mm cone/tapering negative (-). |
| Cable size | Use with 4 gauge battery cable (metal conductor size 0.25" - 0.28"), install by crimping or soldering. |
| Clamp material and finish | pure copper and tin coated |
What to know before buying
- Confirm your battery uses standard SAE top posts and your cable matches the stated 4-gauge conductor range. The listing gives both a combined dimensions-and-weight value and a separate weight entry, with the weight repeated as 159 g. Claims of corrosion resistance and conductivity are manufacturer claims, not independent performance measurements.
Who is it for?
A good fit for
- Replacing corroded ends on a standard SAE top-post battery when using compatible 4-gauge cable.
- Buyers who want positive and negative clamps with covers and heat-shrink tubing.
Less suited to
- Installations using a different battery-post standard or cable size, unless compatibility is confirmed before purchase.

Customer reviews on Amazon
- 5 stars
63% 63% - 4 stars
17% 17% - 3 stars
20% 20% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings are generally positive but include a notable middle-rating share. With a small rating sample and no written review summaries supplied, they offer only a limited signal and do not establish performance or explain individual opinions.
Frequently asked questions
What battery posts does this set fit?
The listing specifies standard SAE top posts, with a 19 mm tapered positive post and a 17 mm tapered negative post.
What cable size is specified?
The clamps are described for 4-gauge battery cable with a metal conductor size of 0.25" - 0.28".
How are the cables attached?
The listing says to install by crimping or soldering.
Are covers and heat-shrink tubing included?
The product description lists one positive terminal and cover, one negative terminal and cover, and heat-shrink tubing.

Alternative options

Vgate Lead Acid Battery Terminal Clamps, 8AWG up to 4/0(XL) AWG Gauge, 12-Way Connectors, Positive and Negative (+/-)(Pair) for SAE/DIN/EN Tapered Top Post
$41.51

M6 Thread Brass Battery Terminal Charging Posts, Ampper Battery Post Adapter (+/-) with Solid M6 Bolts as Male Posts Direct to Battery, Pack of 2
$14.95

Ampper Top Post Battery Disconnect Switch, 12-48 V Battery Power Cut Master Switch Disconnect Isolator for Car, Vehicle, RV and Boat (Negative, On/Off)
$19.35

Lead Alloy Military Spec Battery Terminal Connectors, Ampper Top Post Battery Terminals Clamp Set for Marine Car Boat RV Vehicles (1 Pair)
$14.39

Amfuujoy 2 AWG Battery Cables 16 Inch, with 3/8" Ring Terminal & Battery Clamps, 2PCS Heavy Duty 2 Gauge Pure Copper Battery Inverter Wire Cables, for Car, RV, Truck, Marine & Solar 12V-24V
$25.98

Aynaxcol 4PCS Battery Terminal Connectors for SAE Type A Posts | 4PCS Battery Terminal Connectors, Fits SAE Type A & JIS Type A Posts, Quick Disconnect, with Washers & Lugs
$27.99

Ampper Top Post Battery Disconnect Switch, 12-48 V Battery Power Cut Master Disconnect Kill Switch Isolator W/Terminal and Removable Knob for Car and More (Positive, On/Off)
$31.99

Vgate 8-Way Lead Acid Battery Car Terminal Connector, AGM Post Terminal Ends, 8AWG up to 4/0(XL) AWG Gauge, Positive & Negative for SAE/DIN/EN Tapered Top Post
$36.79

3/8"-16 Thread Male Brass Side Post Battery Terminal Charging Posts, Ampper Standard Side Post 3/8" Battery Post Adapter (+/-) with Top Bolts Compatible with GM Post, Pack of 2
$14.95

Ampper Brass Battery Terminals Connectors Clamps, Top Post Battery Terminal Protector Set for Marine Car Boat RV Vehicles (1 Pair)
$15.83

M8 Thread Female Brass Battery Terminal Post Adapter (+/-), Ampper Battery Terminal Charging Posts for M8 Stud Extension, Pack of 2
$14.07

1/4" Copper Battery Terminal Stud Connector, Ampper M6 Remote Battery Binding Post Junction Post Block Terminal Kit, Pack of 2 (Red and Black)
$11.19
























