Loonie PerksDeals for Canada
BlogSearch
Product guide

AeternaSol FX-KZQ-10 12V 10A MPPT Solar Charge Controller

The AeternaSol FX-KZQ-10 is a 12V, 10A MPPT solar charge controller with USB-C PD and USB-A charging outputs. Its listing describes support for AGM, GEL and 12.8V LiFePO4 batteries, plus an LCD for basic monitoring, making it a fit for compact 12V setups rather than 24V systems.

At a glance

  • The controller is specified for 12V battery systems only, with charging current up to 10A and panel Voc under 30V.
  • USB-C PD is listed at up to 36W and USB-A QC at up to 18W. The two outputs are independent of the 10A solar charging rating.
  • The display shows battery voltage, while a button temporarily displays charging current for five seconds. LEDs indicate battery level and selected battery type.
  • The product description identifies six protection functions, including reverse-polarity and output short-circuit protection.
Price
$31.34Save 22%

Reference price: $39.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • USB-C PD and USB-A QC provide charging outputs for compatible devices without requiring an inverter for USB charging.
  • Supports three stated battery categories, with the selected battery mode retained until changed.
  • Basic voltage and charging-current checks are available on the LCD, with battery-type and battery-level indicators.

Cons

  • The 10A charging limit and 12V-only design rule it out for 24V battery systems or setups needing more charging current.

Technical specifications

17 specifications
Identity and charging
BrandAeternaSol
ModelFX-KZQ-10
Battery system voltage12 volts
Maximum charging current10A
Rated wattage120 watts
Battery types12V AGM, GEL, or 12.8V LiFePO4 battery
Maximum panel open-circuit voltageunder 30V
Solar charging methodMPPT
USB outputs
USB-C outputup to 36W
USB-A outputup to 18W
Display and protection
DisplayLCD
Protection featuresovercharge, overcurrent, reverse current to the solar panel, battery reverse-polarity, overtemperature, and output short-circuit protection
Night standby currentbelow 30mA
Dimensions and installation
Dimensions listed18.01 x 10.49 x 3 cm; 140.61 g
Weight listed141 g
Connector arrangementdedicated solar panel input connector and an SAE battery output connector
Material listedPlastic

What to know before buying

Listing details to confirm

Listing details are inconsistent: the dimensions listing gives 18.01 x 10.49 x 3 cm and 140.61 g, while a separate weight field says 141 g, and the installation copy gives 104 × 51 × 20 mm. Confirm the physical size if fit is critical. Connect the battery first, check polarity, then connect the solar panel. The listing says no SAE-to-bare-wire cable or polarity adapter is included. USB charging speed depends on the device, cable and available power. A blank display may indicate low battery voltage.

What’s in the box

Included
  • 1 solar charge controller

Who is it for?

A good fit for

  • Owners of a supported 12V AGM, GEL or 12.8V LiFePO4 setup needing a controller rated up to 10A.
  • Compact RV or small off-grid installations that can use its specified panel input and SAE battery output.
  • Users who want USB-C and USB-A charging from available solar or battery power alongside battery monitoring.

Less suited to

  • 24V battery systems, or installations whose panel open-circuit voltage is 30V or higher.
  • Systems that need charging current above 10A or require the listing-unspecified SAE-to-bare-wire cable or polarity adapter in the package.
AeternaSol FX-KZQ-10 12V 10A MPPT Solar Charge Controller · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 109 ratings
  • 5 stars69%69%
  • 4 stars12%12%
  • 3 stars4%4%
  • 2 stars6%6%
  • 1 star9%9%

Customer feedback is generally favourable, with the supplied summary reporting successful solar charging and battery topping-up, and functionality and battery life appearing as positive aspects. This is reported experience, not a performance guarantee. The controller's stated 10A limit and 12V-only compatibility are important when judging whether those experiences apply to a particular setup.

Positive themes

  • Feedback summary reports solar charging and keeping batteries topped up.

Frequently asked questions

Can this controller be used with a 24V battery?

No. The listing specifies 12V battery systems and says it is not for 24V systems.

Which batteries does the listing say it supports?

It names 12V AGM, GEL and 12.8V LiFePO4 batteries. Select the matching battery mode.

What are the USB charging outputs?

The listing specifies up to 36W from USB-C PD and up to 18W from USB-A QC. Actual speed depends on the device, cable and available power.

What should I connect first?

The listing instructs users to check polarity and connect the battery first, then the solar panel.

AeternaSol FX-KZQ-10 12V 10A MPPT Solar Charge Controller · photo 3
Additional product photo 3

Alternative options

Product details in Markdown