Loonie PerksDeals for Canada
BlogSearch
Product guide

SUNLU PLA Plus 3D Printer Filament, 1.75 mm, 16 Colours, 4 kg

SUNLU PLA Plus filament comes as 16 mini spools totalling 4 kg, with a range of colours for varied projects. Its 250 g spools can be easier to rotate between colours, but the small spool dimensions may not fit every printer holder.

At a glance

  • Includes 16 colours, with 250 g of filament on each mini spool.
  • The listing gives specific nozzle and bed temperature ranges to use as starting points.
  • Manufacturer describes the PLA+ as tough and impact-resistant, a material claim rather than an independently verified result.
Price
$68.63Save 12%

Reference price: $77.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • A wide colour selection in small quantities is useful for projects that need variety without committing to full-size spools.
  • Individually vacuum-packed spools are claimed, which can help keep unused filament protected until needed.
  • The listed 1.75 mm diameter is intended for compatible FDM printers.

Cons

  • Each spool contains only 250 g, so a larger print may require a spool change or more than one spool of the same colour.
  • The compact spool dimensions may not fit some printer holders.

Technical specifications

13 specifications
Identity
BrandSUNLU
Filament and bundle
Filament typePLA+
Filament diameter1.75 millimeters
Spool count16
Filament per spool250g
Colour selectionBlack, Roasted Chestnut Black, White, Bone White, Grey, Klein Blue, Red, Green, Yellow, Sunny Orange, Lavender Purple, Pink, Wood, Olive Green, Coffee Brown, Transparent
Spool diameter140 mm (5.5 in)
Spool centre hole53 mm (2.08 in)
Spool width36 mm (1.4 in)
Claimed material properties
Dimensional accuracy+/- 0.02mm
Special featureTough & Impact-Resistant
Suggested print settings
Nozzle/extrusion temperature210°C - 235°C (410°F - 455°F)
Bed/platform temperature55°C - 65°C (131°F - 149°F)

What to know before buying

  • Measure the printer holder before buying: the listing specifies a 140 mm spool diameter, 53 mm centre hole and 36 mm width. The stated temperature ranges are manufacturer recommendations, so confirm suitable settings for your printer and print setup.

Who is it for?

A good fit for

  • People who want many colours for small models, prototypes or decorative prints.
  • Users whose 1.75 mm FDM printer can accommodate the specified mini-spool dimensions.
  • Makers who prefer several small colour quantities over fewer large spools.

Less suited to

  • Projects needing more than 250 g of one colour without changing or combining spools.
  • Printers with spool holders that cannot accommodate the listed spool dimensions.
SUNLU PLA Plus 3D Printer Filament, 1.75 mm, 16 Colours, 4 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 844 ratings
  • 5 stars81%81%
  • 4 stars7%7%
  • 3 stars5%5%
  • 2 stars3%3%
  • 1 star4%4%

Customer feedback describes the filament as good quality and easy to print, with positive remarks about colour. Some feedback reports unevenness, while experiences with adhesion and tangling vary. These are customer perceptions, not verified performance findings. The reported printability may matter to buyers using the listed 1.75 mm format, but the small spools and their fit on a printer holder remain practical considerations.

Positive themes

  • Customers report good overall quality and clean, successful prints.
  • Colour receives positive remarks.

Negative themes

  • Some customers report unevenness.

Mixed feedback

  • Customer experiences with adhesion and tangling vary.

Frequently asked questions

How much filament is included?

The listing specifies 16 spools of 250 g each, for 4 kg total.

Will these spools fit my printer?

The listed dimensions are 140 mm in diameter, 53 mm for the centre hole and 36 mm wide. Compare these measurements with your printer holder before ordering.

What print temperatures does SUNLU recommend?

The listing recommends a nozzle or extrusion temperature of 210°C - 235°C (410°F - 455°F) and a bed or platform temperature of 55°C - 65°C (131°F - 149°F).

SUNLU PLA Plus 3D Printer Filament, 1.75 mm, 16 Colours, 4 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown