Loonie PerksDeals for Canada
BlogSearch
Product guide

Polymaker Panchroma Matte PLA Filament, 1.75 mm, 1 kg, Cotton White

Polymaker Panchroma Matte PLA is a 1.75 mm, 1 kg filament in Cotton White for FDM 3D printing. Its matte surface is intended to diffuse light and make layer lines less noticeable, though customer feedback also reports occasional bed-adhesion issues.

At a glance

  • Matte, low-gloss finish is designed to diffuse light and reduce the visibility of printed layer lines.
  • Listing describes the filament as compatible with most FDM printers.
  • Recommended print temperature is 190-230°C, with a bed temperature of 25-60°C.
  • The listing recommends storing it sealed with the included desiccant when not in use.
Price
$18.47Save 12%

Reference price: $20.99

Price checked: Nov 20, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Matte appearance may suit decorative prints where a glossy surface or prominent layer lines are unwanted.
  • 1 kg spool and 1.75 mm diameter provide the listing's stated quantity and filament size for compatible FDM printers.
  • A stated temperature range gives buyers a starting point for slicer setup.

Technical specifications

8 specifications
Identity
BrandPolymaker
Dimensions and installation
Weight listed1 kg
Diameter1.75 millimeters
Materials and appearance
Material listedPolylactic Acid
Colour115 - Matte Cotton White (Hex Code: #F4efeb)
Printing guidance
Recommended printing temperature190-230°C
Recommended bed temperature25-60°C
Claimed maximum printing speed300mm/s

What to know before buying

  • The listing's print-speed claim of up to 300mm/s and broad compatibility are manufacturer claims, not independently confirmed results. Customer feedback reports some bed-adhesion difficulty, so outcomes may depend on printer setup and build surface. Keep the filament sealed with desiccant when not in use, as the listing advises.

Who is it for?

A good fit for

  • FDM printer owners seeking matte Cotton White PLA for decorative objects, models or other prints where a diffuse finish is desired.
  • Buyers who want a 1 kg spool of 1.75 mm PLA and are prepared to tune bed adhesion for their printer.

Less suited to

  • Those who need verified high-speed performance or guaranteed adhesion across different printers and build surfaces.
  • Those looking for a glossy finish or a different filament material.
Polymaker Panchroma Matte PLA Filament, 1.75 mm, 1 kg, Cotton White · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 2,121 ratings
  • 5 stars81%81%
  • 4 stars8%8%
  • 3 stars5%5%
  • 2 stars3%3%
  • 1 star3%3%

Customer feedback highlights printability, colour and appearance, including appreciation for the matte finish, while some report bed-adhesion issues and opinions on quality and durability vary. This matters for buyers prioritizing consistent results: the filament's stated compatibility and finish do not ensure the same adhesion or output on every printer. Aggregate ratings lean positive overall, but do not explain why individual customers rated it as they did.

Positive themes

  • Customers describe the filament as printing nicely and working well with many printers.
  • Feedback praises the colour and matte appearance.

Negative themes

  • Some customer feedback reports bed-adhesion issues.

Mixed feedback

  • Opinions on product quality and durability vary.

Frequently asked questions

What printers is this filament intended for?

The listing describes it as suitable for most FDM 3D printers. Confirm the printer accepts 1.75 mm filament before buying.

What print settings does the listing recommend?

It recommends a printing temperature of 190-230°C and a bed temperature of 25-60°C. Treat these as starting guidance and adjust for your printer and setup.

Does the matte finish hide layer lines?

The listing says its low-gloss surface diffuses light to reduce the visibility of layer lines. This is a stated finish benefit, not a guarantee that lines will disappear.

How should the filament be stored?

The listing recommends keeping it sealed with the included desiccant when it is not in use.

Polymaker Panchroma Matte PLA Filament, 1.75 mm, 1 kg, Cotton White · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g
AMOLEN Silk Glow-in-the-Dark PLA Filament, 1.75 mm, 4 × 200 g

C$39.99

C$35.19

-12%
-12%
Product details in Markdown