1 / 7Polymaker HT-PLA-GF PA18008 1.75 mm Green 3D Printer Filament, 1 kg
PA18008 Printer: Polymaker HT-PLA-GF is a glass-fibre-reinforced PLA filament in Power Tool Green, listed for high-temperature functional prints. The listing claims heat resistance up to 150°C and recommends annealing for improved thermal performance, while customer feedback also flags brittleness and mixed reliability.
At a glance
- Glass-fibre reinforcement is presented as a way to add stiffness for functional parts such as brackets, jigs and enclosures.
- The listing describes PLA-like printing and supports speeds up to 350 mm/s, subject to printer setup and material handling.
- Annealing is recommended to improve heat deflection and dimensional stability.
- The listing advises a hardened steel or ruby-tipped nozzle because glass fibres may wear standard brass nozzles.
Reference price: $22.99
Price checked: Nov 20, 2026
View offerAhead of Black FridayExplore the selectionPros and cons
Pros
- A 1.75 mm diameter and claimed compatibility with most FDM printers may suit common filament setups.
- The listing combines a stated 150°C heat-resistance claim with annealing guidance for parts used in warmer settings.
- The glass-fibre-reinforced formulation is intended for stiffer functional components than the listing's standard HT-PLA comparison.
Cons
- Customer feedback reports brittleness and repeated filament breakage, which could disrupt longer prints.
Technical specifications
10 specifications| Brand | Polymaker |
|---|---|
| Model | PA18008 |
| Dimensions listed | 20 x 20 x 6 cm; 1 kg |
|---|---|
| Weight listed | 1 kg |
| Material listed | Polylactic Acid |
|---|---|
| Filament diameter | 1.75 millimeters |
| Colour | 121 - 1.75mm Power Tool Green (Hex Code: #Cecf45) |
| Claimed heat resistance | 150°C |
|---|---|
| Claimed maximum printing speed | 350 mm/s |
| Suggested annealing | 100°C for 30 minutes |
What to know before buying
Listing details to confirm
The 150°C temperature is a listing claim, not an independent result, and annealing at 100°C for 30 minutes is described as improving performance rather than guaranteeing a finished part's heat limit. Confirm printer compatibility and nozzle suitability, and account for the recommended wear-resistant nozzle with glass-fibre filament.
Who is it for?
A good fit for
- Makers printing functional brackets, tool mounts, fixtures or enclosures who want glass-fibre reinforcement and are prepared to anneal parts where appropriate.
- Users seeking a green PLA-based filament for common 1.75 mm FDM setups, with printer and hotend compatibility checked first.
Less suited to
- Buyers who need flexible filament or cannot accommodate brittleness-related print interruptions.
- Users without a suitable wear-resistant nozzle who do not want to risk accelerated wear to standard brass nozzles.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
7% 7% - 3 stars
8% 8% - 2 stars
2% 2% - 1 star
12% 12%
Customer feedback describes PLA-like printability as a strength, but also reports brittleness and repeated breaks, with mixed experiences around quality, reliability, texture and adhesion. That matters for long or functional prints, even though the listing claims glass-fibre reinforcement and heat resistance. Aggregate ratings lean positive overall, but the rating distribution also includes a notable low-star share, so ratings alone do not establish consistent performance or explain individual outcomes.
Positive themes
- Feedback describes printability as positive and says the material behaves similarly to PLA.
Negative themes
- Feedback reports brittleness and repeated filament breakage.
- Some feedback indicates concerns about value for money.
Mixed feedback
- Experiences with quality, reliability, texture and adhesion are described as mixed.
Frequently asked questions
Does this filament need annealing?
Annealing is presented as an option to improve thermal performance. The listing recommends 100°C for 30 minutes, but does not make annealing a universal requirement.
What nozzle does the listing recommend?
It recommends a hardened steel or ruby-tipped nozzle because the glass fibres may wear standard brass nozzles over time.
Is the 150°C figure a guaranteed printed-part operating temperature?
No. It is a manufacturer/listing claim, and the provided details do not establish a guaranteed operating limit for every print. Annealing is said to improve heat performance.
What do customers report about printing and reliability?
Feedback says the filament can print well and behave similarly to PLA, but also reports brittleness and repeated breakage, alongside mixed experiences with quality, reliability, texture and adhesion.

Alternative options

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Army Dark Green | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$17.59

Polymaker Panchroma PLA Filament 1.75mm, 1kg, Green | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Easy Print & Clog-Free & Neatly Wound, Accuracy +/- 0.02mm
$17.17

Polymaker TPU Filament 1.75mm Shore 90A 0.75kg Polymaker Teal | 3D Printer Filament, High Speed 90A TPU Flexible Filament, Fast Printing, Dimensional Accuracy +/- 0.03mm
$32.55

Polymaker PETG Filament 1.75mm Dark Green 1KG, High Speed, 2.2 Lbs | Up to 300mm/s, Easy to Print, High Strength, Excellent Layer Adhesion, Warp Free, 3D Printer Filament with Most 3D Printers
$21.11

Polymaker Panchroma Matte PLA Filament 1 .75 Refill 1kg, Savannah Yellow | Spoolless High Speed 3D Printing Filament 2.2lb, Compatible with Bambu Labs & FDM 3D Printers, Clog-Free for Reusable Spool
$12.99

Polymaker PLA Pro Filament 1.75mm 1KG Light Red, High-Impact Resistance | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$26.99

Polymaker Panchroma Silk PLA Filament 1.75mm for 3D Printing, 1kg, Lime | Neatly Wound, High-Gloss Finish PLA, Easy Print & Smooth Feeding, Compatible with Bambu Lab & Most 3D Printers
$23.75

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Charcoal Black | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

Polymaker PLA Pro 3D Printing Filament Black 1KG, High-Impact Tough PLA, Fast Printing up to 300mm/s, Easy to Print, No Enclosure Required, High Speed New Formula, Formerly Polysonic PLA Pro
$21.11

Revopoint POP3 Plus 3D Scanner, Full-Color Scan, for 3D Printing, Advanced | 0.04mm, for Medium Object, Outdoor Scanning, 18 FPS High-Speed, Wi-Fi 6, User-Friendly, for Android/iOS/Win/MacOS
$759.45

ANYCUBIC PLA Plus 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, PLA+ Filament with Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Texture Grey
$18.04

Polymaker PLA Filament for Cosplay 1.75mm 1KG, Version B | Extra Durability, Easy to Print, Tangle-Free, Neatly Wound, 3D Printer Filament for Most 3D Printers
$27.27























