Loonie PerksDeals for Canada
BlogSearch
Product guide

ANYCUBIC PETG 3D Printer Filament, 1.75 mm, 10 kg, Texture Grey

Texture Grey: ANYCUBIC PETG filament is a 10 kg supply of 1.75 mm material for compatible FDM printers and 3D printing pens. The listing claims ±0.02 mm dimensional accuracy, toughness and resistance to water and common cleaning agents, while customer feedback also mentions occasional hot-end buildup and slight deformation.

At a glance

  • Listed as compatible with most 1.75 mm FDM printers and 3D printing pens.
  • The manufacturer claims ±0.02 mm dimensional accuracy and reduced shrinkage to help limit warping and cracks.
  • Listing claims toughness, enhanced chemical and water resistance, and strong layer adhesion.
  • Filament is described as dried before vacuum sealing. The listing advises using it promptly after opening and drying it again after storage.
Price
$159.99

Price checked: Nov 17, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The 10 kg quantity suits buyers planning repeated or larger print runs.
  • The claimed water and chemical resistance may suit functional parts exposed to humid conditions or common cleaning agents.
  • Customer feedback reports consistent print quality and generally positive impressions of filament quality.

Cons

  • Customer feedback includes reports of filament goo spreading on the hot end and slight deformation.
  • Customer opinions about the listed grey colour are mixed.

Technical specifications

7 specifications
Identity and material
BrandANYCUBIC
MaterialPETG
Filament diameter1.75 millimeters
ColourTexture Grey-10
Dimensional accuracy claim±0.02mm
Dimensions and installation
Dimensions listed43 x 39 x 23 cm; 10 kg
Weight listed10 kg

What to know before buying

  • The listing calls the colour “Texture Grey” in the title but gives “Texture Grey-10” in the details. Its claim of “twice” the impact resistance of standard PLA is not accompanied by a measurement method, and filament dimensions of 43 x 39 x 23 cm are listed alongside a 10 kg weight without clarifying what those dimensions describe. Confirm the colour and storage or handling fit for your setup before buying.

Who is it for?

A good fit for

  • FDM printer owners whose equipment accepts 1.75 mm PETG and who expect to use a large quantity.
  • Makers producing functional parts or prototypes where the claimed toughness and resistance to water or common cleaning agents are relevant.

Less suited to

  • Buyers who need a small amount of filament or a clearly specified colour shade.
  • Anyone whose printer or pen does not support 1.75 mm filament or PETG.
ANYCUBIC PETG 3D Printer Filament, 1.75 mm, 10 kg, Texture Grey · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 208 ratings
  • 5 stars80%80%
  • 4 stars9%9%
  • 3 stars4%4%
  • 2 stars3%3%
  • 1 star4%4%

Customer feedback is broadly positive about filament quality, consistent print results and functionality, while some reports mention goo spreading on the hot end or slight deformation. Opinions on colour are mixed. For buyers considering a large 10 kg supply, those reports make printer setup, filament handling and shade expectations practical points to weigh. Aggregate ratings lean positive overall, but they do not establish how frequently any specific issue occurs.

Positive themes

  • Feedback describes good overall quality and consistent printing.

Negative themes

  • Some customer feedback reports filament goo spreading on the hot end and slight deformation.

Mixed feedback

  • Customer opinions about colour are mixed.

Frequently asked questions

Will this filament fit my 3D printer?

The listing says it works with most FDM printers and 3D printing pens that use 1.75 mm filament. Check your device's filament diameter and PETG compatibility.

What does the listing claim about accuracy?

It claims dimensional accuracy of ±0.02 mm. This is a listing claim, not an independently verified measurement.

How should I handle filament after opening or storage?

The listing recommends using it promptly after opening and drying it thoroughly before printing again after storage.

Is the colour description consistent?

The title says “Texture Grey,” while the product details say “Texture Grey-10.” Customer feedback also describes mixed opinions about colour, so confirm the selected shade.

ANYCUBIC PETG 3D Printer Filament, 1.75 mm, 10 kg, Texture Grey · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.3
E-Z Ink 10-Pack Remanufactured Epson 220XL Ink Cartridges
E-Z Ink 10-Pack Remanufactured Epson 220XL Ink Cartridges

C$39.99

C$35.99

-10%
-10%
Product details in Markdown