Loonie PerksDeals for Canada
BlogSearch
Product guide

Colourbing Glow-in-the-Dark PETG Filament, 1.75 mm, 4 × 250 g

Colourbing glow-in-the-dark PETG filament comes as four 250 g spools in green, blue, yellow and purple, with a 1.75 mm diameter. It suits buyers seeking small quantities of luminous PETG for functional parts and decorative prints, but glow and print behaviour depend on charging light, colour, wall thickness and printer setup.

At a glance

  • Four compact spools provide four glow colours without requiring a full-size roll of each.
  • The listing describes PETG as more flexible and less brittle than standard PLA, and positions it for functional accessories and practical parts.
  • The seller says the filament is pre-dried and vacuum-sealed with desiccant. It also recommends drying again before printing for cleaner results.
  • Glow requires exposure to sunlight or UV light. Brightness and duration vary with colour, exposure and printed wall thickness.
Price
$32.39Save 10%

Reference price: $35.99

Price checked: Nov 18, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Four colours and individual 250 g rolls make it easier to try different luminous colours with smaller amounts of each.
  • The PETG material is presented for tougher, more flexible functional prints than standard PLA.
  • The listing supplies concrete re-drying and printing guidance, plus a warning about abrasive glow pigment wear on brass nozzles.

Cons

  • Each colour is limited to a 250 g spool, so larger projects may require replenishment sooner than with full-size rolls.
  • The glow effect depends on prior light exposure and print details, so the listing does not promise a fixed brightness or duration.

Technical specifications

11 specifications
Identity
BrandColourbing
Material and format
Filament typePETG
Diameter1.75 millimeters
ColoursGreen,blue,yellow,purple
Spool quantity4
Filament per spool250g
Listing print guidance
Suggested nozzle temperature240–260°C
Suggested print speed for appearance-focused prints80–120 mm/s
Suggested re-drying temperature60–70°C
Suggested re-drying duration8 hours
Moisture preparation claim
Moisture level before packaging0.3% or less

What to know before buying

  • Glow output varies by colour, prior sunlight or UV exposure, and printed wall thickness. Re-drying at the stated settings is suggested to reduce moisture-related print issues.
  • The listing recommends a hardened copper nozzle of 0.4 mm or larger because glow particles can wear brass nozzles. Printer compatibility and any adapter fit depend on spool and printer configuration.

Who is it for?

A good fit for

  • 3D-printing hobbyists who want several glow colours in small rolls for accessories, tags, organizers or decorations.
  • PETG users making functional parts who prefer the claimed flexibility and impact resistance over standard PLA.
  • Printers whose users can control drying, nozzle material and PETG settings.

Less suited to

  • Buyers seeking large single-colour spools for extended production runs.
  • Users who need a guaranteed glow brightness or duration, or cannot expose prints to sunlight or UV light before use.
  • Setups that require a specific spool size or printer compatibility that has not been confirmed.
Colourbing Glow-in-the-Dark PETG Filament, 1.75 mm, 4 × 250 g · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 31 ratings
  • 5 stars60%60%
  • 4 stars23%23%
  • 3 stars5%5%
  • 2 stars8%8%
  • 1 star4%4%

Aggregate ratings are generally favourable, with most ratings in the four- or five-star categories, but a smaller share are lower. With no written review detail supplied, these figures do not establish specific strengths or problems. They offer limited guidance on how consistently the filament prints or glows in a particular setup.

Frequently asked questions

What colours and quantities are included?

The listing describes four 250 g spools in green, blue, yellow and purple, for a stated total of 1 kg.

How does the glow effect work?

The listing says the filament absorbs sunlight or UV light and glows in darkness. Brightness and duration vary by colour, exposure and printed wall thickness.

Does the filament need drying before printing?

It is described as pre-dried to 0.3% or less moisture and vacuum-sealed with desiccant. The listing recommends drying again at 60–70°C for 8 hours to help reduce stringing and improve surface quality.

What nozzle does the listing recommend?

It recommends a hardened copper nozzle with a diameter of 0.4 mm or larger, noting that abrasive glow particles can wear brass nozzles.

Colourbing Glow-in-the-Dark PETG Filament, 1.75 mm, 4 × 250 g · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.3
E-Z Ink 10-Pack Remanufactured Epson 220XL Ink Cartridges
E-Z Ink 10-Pack Remanufactured Epson 220XL Ink Cartridges

C$39.99

C$35.99

-10%
-10%
Product details in Markdown