1 / 7ANYCUBIC Cool Plate for Kobra 3 and Kobra 3 V2, 250 × 250 mm
ANYCUBIC Cool Plate is a replacement print surface listed for Kobra 3 and Kobra 3 V2 printers. Its treated surface is claimed to support PLA adhesion at 45℃ and produce a matte first layer, with a low-temperature design intended to use less electricity than standard plates.
At a glance
- The manufacturer claims the surface is treated for PLA adhesion at 45℃, with reduced risk of warping and bottom-layer separation.
- A matte first layer is claimed, with less light reflection and a texture intended to blend with the print.
- The listing says to select cool plate in the slicer and re-level after installing the plate.
- Water rinsing is recommended for maintenance, while organic solvents, especially acetone, should be avoided.
Pros and cons
Pros
- The listed 250x250mm size and stated compatibility target Kobra 3 and Kobra 3 V2 owners.
- The claimed low-temperature PLA adhesion may suit users seeking a cool-plate setup rather than a standard plate.
- The water-rinse care instructions are straightforward.
Cons
- The listed surface compatibility is limited to PLA, so buyers using other filament types should confirm suitability before purchase.
Technical specifications
8 specifications| Brand | ANYCUBIC |
|---|---|
| Part number | S010326-2 |
| Plate size | 250x250mm |
|---|---|
| Weight listed | 400 g |
| Installation note | After installing the print bed, please re-level it to improve the printing effect. |
| Compatible printers listed | Anycubic Kobra 3/Kobra 3 V2 |
|---|---|
| Claimed adhesion temperature | 45℃ |
| Care instructions | rinse with water for maintenance, and avoid organic solvents (especially acetone) to protect the plate’s surface |
What to know before buying
Listing details to confirm
The title mentions adhesive, but the care instructions say no adhesive is needed. The claimed 250x250mm plate size also differs from the parcel dimensions of 33 x 29 x 2 cm, which are package dimensions rather than confirmed plate dimensions. Confirm the selected listing’s plate size and what adhesive, if any, is supplied. Re-level the bed after installation, choose cool plate in the slicer, and avoid organic solvents, especially acetone.
What’s in the box
Included- Cool Plate
Who is it for?
A good fit for
- Kobra 3 or Kobra 3 V2 owners looking for a 250x250mm cool plate listed for their printer.
- PLA users interested in a claimed matte first layer and lower-temperature adhesion.
Less suited to
- Buyers who need confirmed support for filaments other than PLA.
- Buyers who need a stated energy-saving measurement or independently verified durability figures.

Frequently asked questions
Which printers is this plate listed for?
The listing names the Anycubic Kobra 3 and Kobra 3 V2. Confirm the plate size against your printer before ordering.
Does it need adhesive?
The title says “with Adhesive,” while the care instructions say no adhesive is needed. The listing does not clearly establish whether adhesive is included, so check the selected listing.
What care does the manufacturer recommend?
The instructions say to rinse it with water and avoid organic solvents, especially acetone. They also say to re-level the bed after installation.

Alternative options

Energy-Saving Kobra 3 Cold Build Plate 256*268mm Double Sided Glossy+Matte Low-Temperature Strong-Adhesion Platform Compatible with ANYCUBIC Kobra 3&Kobra 3 V2 Combo 3D Printers(No Glue Required)-1PCS
$19.99

Kobra 3 V2 PEI Build Plate 256x268mm Double Sided Smooth+Textured Heated Bed Flexible Removable Spring Bed Plate Compatible with ANYCUBIC Kobra 3,Kobra 3 V2 and Kobra 3 V2 Combo 3D Printers
$21.99

Creality Official PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
$22.99

4pcs for Anycubic Kobra 4/ Kobra X Nozzle 0.4+0.4+0.6+0.8mm | Titanium Alloy Heat Break High Temperature Wear Resistant Electroplated Hot End Kit for Anycubic Kobra 4/ Kobra X Hotend
$33.99

IdeaFormer-3D Diamond PEO+Carbon Fiber PET Build Plate for Anycubic Kobra 3/Kobra 3 Combo, Double Sided PEO PET Spring Steel Plate Flexible Sheet for 256x268mm Kobra 3 Series
$23.19

HIKUDIY 256x268mm PEF+PEY Build Plate for Anycubic Kobra 3 V2/Kobra 3/Combo/ACE Pro, Rainbow Confetti PEF+Galaxy PEY Spring Steel Plate Print Bed for Anycubic Kobra 3 3D Printer
$23.19

HIKUDIY 264X276mm Black PEI Build Plate for Kobra X/Kobra S1, Smooth PEI+Textured PEI Platform Spring Steel Flexible Platform Heated Bed for Anycubic Kobra S1 Combo 3D Printer
$25.99

Energy-Saving Kobra S1/Kobra X/Kobra 4 Cold Build Plate 264*276mm Double Sided Glossy+Matte Low-Temperature Strong-Adhesion Platform Compatible with ANYCUBIC Kobra S1/ Kobra X/Kobra 4 3D Printers-1PCS
$27.59

for Anycubic Kobra 4/ Kobra X Nozzle 0.4mm Hardened Steel Hotend Kit | Titanium Alloy Heat Break High Temperature Wear Resistant Electroplated Hot End Kit for Anycubic Kobra 4/ Kobra X Hotend
$14.99

HIKUDIY 264X276mm Black PEI Build Plate for Kobra X/Kobra S1, Double Sided Textured PEI Platform Spring Steel Flexible Platform Heated Bed for Anycubic Kobra S1 Combo 3D Printer
$17.59

Anycubic Kobra X 3D Printer, 4-Colour Printing,19-Color Max | 2X Material Saving, 300℃ Nozzle,Supports PLA/PETG/TPU,Filament Not Included, for Small Business & Studio Use, 260x260x260 mm
$389.00

Anycubic Kobra X Multi-Colour 3D Printer, Easy Setup with Native 4-Color | Up to 19 Colors, Auto Leveling, Filament Not Included, 600mm/s High Speed,300℃ Nozzle and Built-in Camera,260 x 260 x 260 mm
$389.00