1 / 7Anycubic ACE 2 Pro Filament Dryer Box, 65°C Active Drying
Anycubic ACE 2 Pro is a filament dryer and multicolour-feeding unit for selected Kobra 3-series printers. Its listing claims active drying while printing, sealed storage and automatic refill, with compatibility limited to four named printer models.
At a glance
- Claims active filament drying at 65°C during printing, alongside airtight storage.
- Four independent brushless motors manage filament feed and retraction, according to the listing.
- Automatic refill is described as switching to a backup spool of the same colour and material when one runs out.
- One unit is listed for native four-colour printing. Eight-colour output requires two units and an additional accessory.
Pros and cons
Pros
- Combines drying and sealed spool storage, which may suit printing with moisture-sensitive filament.
- The listing describes a quick-release PTFE-tube buffer assembly for clearing jams without fully dismantling the dryer.
- Automatic refill and proprietary-filament recognition may reduce manual spool changes and setup for compatible materials.
Cons
- Compatibility is restricted to the four named Kobra 3-series printers, and the listing says this unit cannot be used simultaneously with the older ACE Pro.
- Eight-colour printing requires a second unit and a separate 8-in-1 or 2-in-1 accessory.
Technical specifications
9 specifications| Brand | ANYCUBIC |
|---|
| Dimensions listed | 45D x 35W x 32H centimetres |
|---|---|
| Compatible printers | Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra 3 Max V2 |
| Colour | Black |
| Drying temperature claimed | 65°C |
|---|---|
| Compatible materials | Polylactic Acid, Polyethylene Terephthalate, Thermoplastic Polyurethane, Fiber-reinforced filaments |
| Motor count and type | Four independent brushless motors |
|---|---|
| Closed-door noise claim | under 48 dB |
| Filament swap claim | 56 seconds |
What to know before buying
- The listing says avoid cardboard spools. Its automatic-refill claim applies to a backup spool of the same colour and material. Eight-colour output needs two ACE 2 Pro units plus an 8-in-1 or 2-in-1 accessory, and the unit is not usable simultaneously with the older ACE Pro.
Who is it for?
A good fit for
- Owners of a listed Kobra 3-series printer seeking filament drying during printing and sealed spool storage.
- Users who want the described automatic refill between compatible spools of the same colour and material.
Less suited to
- Owners of printers outside the listed Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra 3 Max V2 models.
- Buyers who want eight-colour output from a single unit or need to run this alongside an older ACE Pro.

Frequently asked questions
Which printers does the ACE 2 Pro support?
The listing names Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra 3 Max V2. It also says the unit cannot be used simultaneously with the older ACE Pro.
Can it dry filament while a print is running?
The listing claims 65°C active drying while printing, as well as sealed filament storage.
How many colours can one unit print?
The listing describes native four-colour printing with one unit. It says eight-colour output requires two ACE 2 Pro units paired with an 8-in-1 or 2-in-1 accessory.
Does automatic refill work with any spool?
The listing describes switching to a backup spool of the same colour and material and advises avoiding cardboard spools.

Alternative options

Anycubic ACE 2 Pro Multicolor Filament Dryer Box for Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra 3 Max V2 3D Printer, 65℃ Active Drying, Quiet Brushless Motors & Auto Refill, Active Moisture Control
$339.99

Anycubic ACE Pro Multicolor 3D Printer Filament Dryer Box for Kobra 3 Max | Not for Anycubic Kobra S1 and Kobra X, Filament Auto Backup and Intelligent Identification
$242.24

Anycubic ACE 2 Pro 3D Printer Filament Dryer Box for Kobra S1, Kobra X and Kobra S1 Max 3D Printer, Multicolor Printing with 65°C Active Moisture Control Station, Not Compatible with Original Ace Pro
$339.99

ANYCUBIC ACE 2 Pro 3D Printer Filament Dryer Box, for Anycubic Kobra S1, Kobra X and Kobra S1 Max,Multicolor Printing with 65°C Active Drying & 4 Brushless Motors, Auto-Resume & Runout Detection
$339.99

Anycubic Kobra X 3D Printer, 4-Colour Printing,19-Color Max | 2X Material Saving, 300℃ Nozzle,Supports PLA/PETG/TPU,Filament Not Included, for Small Business & Studio Use, 260x260x260 mm
$389.00

Anycubic Larger 3D Printer Kobra 3 Max V2, 420×420×500mm³ Print Volume | 300℃ Full-Metal Hotend, Auto-Leveling & Anti-Skip, Support Multicolor Need ACE 2 Pro, 600mm/s Print Speed, Smart Vibration
$609.99

FLASHFORGE AD5X Multi-Color 3D Printer 4 Colors with IFS, Fully Auto Leveling FDM 3D Printer with Max 600mm/s High Speed Printing and Max 300°C Nozzle, Large Printing Size 220 * 220 * 220mm (AD5X)
$459.00

ELEGOO Centauri 2 Combo 3D Printer CoreXY Build Volume 256×256×256mm | 500mm/s High-Speed CoreXY with Canvas 4-Color Printing, Auto Leveling, Smart Filament Detection, 350°C High Temp Nozzle
$424.15

ANYCUBIC Photon Mono 4 Resin 3D Printer, 7" 10K Mono LCD Screen | with Stable LighTurbo Matrix, 70mm/h Fast Printing 3D Printer, Print Volume 6.04" x 3.42" x 6.49" / 153 x 87 x 165mm
$223.99

Anycubic Kobra X 3D Printer Only, 4 Built-in Colors for Beginners | LeviQ 3.0 Auto Leveling,600mm/s High Speed, No Filament Included, 300℃ Nozzle, Built-in Camera, Print Size 260 x 260 x 260 mm
$479.00

ANYCUBIC 3D Printer Kobra S1 ACE 2 Pro Combo, CoreXY 600 mm/s High Speed Printing with Auto Calibration, 320℃ Quick Detachable Nozzle and Built-in Camera, 250x250x250 mm Printing Size
$699.99