1 / 7TINMORRY PETG-CF Black Carbon-Fibre PETG Filament, 1.75 mm, 1 kg
Black: TINMORRY PETG-CF is a carbon-fibre-reinforced PETG filament for FDM 3D printers. Its listing claims support for printing up to 300 mm/s, but also calls for drying before use and a wear-resistant steel nozzle, so printer setup is part of the buying decision.
At a glance
- PETG blended with carbon fibre, described for functional parts and model builds.
- The listing claims printing speeds up to 300 mm/s and compatibility with several FDM printer models.
- Print guidance includes drying the filament and using a wear-resistant steel nozzle at least 0.4 mm.
Pros and cons
Pros
- A 1 kg spool gives a clear material quantity for planning prints.
- The listing supplies temperature and initial-layer fan guidance, rather than leaving setup entirely unspecified.
- Customer feedback describes easy printing, a good-looking finish and satisfactory adhesion.
Cons
- The carbon-fibre content requires a wear-resistant steel nozzle, so a conventional brass nozzle is not suitable under the listing's guidance.
- The listing recommends drying before use, adding preparation before printing.
Technical specifications
13 specifications| Brand | TINMORRY |
|---|---|
| Model | PETG-CBF-Black |
| Weight listed | 1 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Material listed | Polyethylene Terephthalate Glycol |
|---|---|
| Listed colour | Petg-cf-black |
| Recommended printing temperature | 240-270 |
|---|---|
| Build platform temperature | 75℃-90℃ |
| Initial-layer fan guidance | 1st to 3rd layer, turn off cooling fan |
| Bambu P1P or X1 nozzle guidance | If your 3D printer is Bambu P1P or X1, we recommend the nozzle temperature above 250 degrees. |
| Nozzle material and minimum diameter | wear-resistant steel nozzles (≥ 0.4 mm) |
| Drying guidance | Dry before Use for the Highest Print Quality. |
| Claimed maximum print speed | 300mm/s |
What to know before buying
- The 300 mm/s speed, reduced clogging, strength and near-warp-free printing are listing claims, not independently established results. The listing says colour and sheen can vary by print and display, and recommends contacting the maker for a filament profile on printers from other brands.
Who is it for?
A good fit for
- FDM users seeking black PETG with carbon-fibre reinforcement for functional parts or racing and drone models.
- Owners with a suitable wear-resistant steel nozzle who are comfortable drying filament and tuning print settings.
Less suited to
- Users whose printer has only a conventional brass nozzle and no suitable steel replacement.
- Buyers who want a filament that requires no drying or printer-profile adjustments.

Customer reviews on Amazon
- 5 stars
83% 83% - 4 stars
10% 10% - 3 stars
4% 4% - 2 stars
1% 1% - 1 star
2% 2%
Customer feedback is broadly positive about printability, finish, strength and rigidity, with some feedback also appreciating adhesion and value. That is encouraging for buyers seeking a carbon-fibre PETG for functional prints, but it does not verify the listing's 300 mm/s claim or replace the stated drying and steel-nozzle requirements. The rating distribution is mostly five-star, with a smaller spread across lower ratings, so experiences are not uniform.
Positive themes
- Feedback describes the filament as easy to print and says it produces an attractive finish.
- Customers report strong, rigid prints and satisfactory adhesion.
Frequently asked questions
What nozzle does this filament require?
The listing says not to use a conventional brass nozzle and recommends a wear-resistant steel nozzle with a diameter of at least 0.4 mm.
What print settings does the listing recommend?
It lists a printing temperature of 240-270 and a build platform range of 75℃-90℃, and advises turning off the cooling fan for the first three layers. For Bambu P1P or X1 printers, it recommends a nozzle temperature above 250 degrees.
Can it print at 300 mm/s?
The listing claims a maximum speed of 300mm/s. Treat that as a manufacturer claim and confirm the profile and results on your specific printer.
Should the filament be dried before printing?
Yes. The listing advises drying before use for its highest print quality.

Alternative options

Polymaker PETG Filament Refill 1.75mm, 10KG, Black | 3D Printer Filament, High-Speed 500mm/s, Spool-Free, Smooth Feeding, Low Stringing, Strong Layer Adhesion
$109.99

ELEGOO PETG HF 3D Printer Filament 1.75mm White 1KG | High Flow for Fast Printing Max 600mm/s with Smooth Stable Extrusion, Fit Most FDM Printer
$18.69

ELEGOO Carbon Fiber PLA Filament 1.75mm Black 1KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 1kg Spool 3D Printing Filament, Fits for Most FDM 3D Printers
$23.39

TINMORRY Rapid PETG Filament 1.75mm, 3D Printer Filament for High Speed Printing, Fits Most FDM 3D Printers, 1 KG Spool, Vinca Blue
$15.33

ANYCUBIC PETG Filament Bundle, 3D Printer Filament, 1.75mm Dimensional Accuracy +/- 0.02mm, High Toughness,Print with Most FDM 3D Printers,2KG Reusable Spool,Texture Grey
$35.19

ELEGOO Rapid PETG 3D Printer Filament 1.75mm White 2KG | Max 600mm/s High Speed Printing, Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer 2 Pack 1kg Cardboard Spools
$30.59

Revopoint MetroX Pro 3D Scanner, Blue Laser Scan, for 3D Printing, Standard | 0.01mm, Industrial-Grade Precision, Full Color Scan, Reverse Engineering/Automotive Modeling, 4 Scanning Modes, for Win/macOS
$1,161.30

Revopoint 6mm 3D Scanning Markers Dots for 3D Scanners, 200 Points | 3D Tracking Dots, Preventing Tracking Loss, Enhancing Accuracy, High Reflectivity Reference Point Stickers, Diffuse Markers
$11.49

ANYCUBIC PETG Filament 1.75mm,3D Printer Filament,Dimensional Accuracy +/- 0.02mm,Exceptional Toughness,Print with Most FDM 3D Printers,2KG Spool,Texture Grey
$32.39

ELEGOO PETG-CF 3D Printer Filament 1.75mm Black 1KG | High-Strength, Rigid Carbon Fiber PETG 1KG Spool, Abrasion-Resistant, Ideal for Functional Parts, Fits Most FDM 3D Printers
$28.04

ELEGOO Rapid PETG 3D Printer Filament 1.75mm Black 4KG | Max 600mm/s High Speed Printing, Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer 4 Pack 1kg Cardboard Spools
$46.74

Siraya Tech Fibreheart PET-CF 3D Printer Filament, High Strength, Black 1kg | Carbon Fiber Reinforced PET, High Strength & Rigidity, Easy Print, Dimensionally Stable, Aluminum Foil Sealed Bag
$45.49