# Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige

Polymaker PolySmooth is a beige PVB filament for 3D printing, with a listing claim that prints can be smoothed using IPA alcohol. Its moisture sensitivity makes dry storage and careful handling important considerations alongside its surface-finishing potential.

- [Original product page](https://loonieperks.com/product/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [View offer](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- Market: CA
- Language: en-CA
- Currency: CAD
- Brand: Polymaker
- Model: PJ01012
- Price: 19.99 CAD
- Previous price: 29.99 CAD
- Discount: 33%
- Price checked: 2026-11-19T19:47:18.384Z
- Rating: 4.7 / 5
- Reviews: 5

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## At a glance

- PVB filament described as printing with conditions similar to PLA.
- The listing describes smoothing the print surface with IPA alcohol, with the surface finish dependent on post-processing.
- A drybox is recommended because the filament is described as absorbing moisture more readily than regular PLA.

## Pros

- Alcohol smoothing offers a way to reduce visible layer lines after printing, according to the listing.
- The listed beige colour and 1.75 mm diameter make the intended filament format clear.

## Cons

- Moisture management adds a storage and printing requirement compared with a less moisture-sensitive filament.

## Specifications

### Identity
- Brand: Polymaker
- Model: PJ01012
### Dimensions and installation
- Dimensions listed: 16 x 20 x 6 cm; 750 g
- Weight listed: 750 g
- Filament diameter: 1.75 millimeters
- Colour: 113 - 1.75mm Beige \(Hex Code: \#Ebd591\)
### Materials and protection
- Material listed: Polyvinyl Butyral
### Printing and finishing
- Suggested nozzle temperature: 200˚C
- Suggested bed temperature: 50˚C
- Suggested speed: 60mm/s
- Listed print temperature range: 190-220˚C
- Listed print speed range: 40-60mm/s
- Alcohol smoothing: Alcohol Smoothable

## Before you buy

- The listing gives different print guidance: one section specifies a 200˚C nozzle, 50˚C bed and 60mm/s, while another gives 190-220˚C and 40-60mm/s. Treat these as listing details to confirm against the material and printer setup. It also alternates between IPA spray finishing and smoothing with the Polysher, so confirm the intended post-processing method. Drybox use is recommended, and the listing warns not to release the filament tip to avoid tangles.

## A good fit for

- Makers seeking beige PVB filament with an alcohol-smoothing post-processing option.
- Users prepared to manage moisture-sensitive filament and tune print settings for their setup.

## Less suited to

- Buyers who want filament that requires no special moisture-control practices.
- Users looking for a confirmed single print profile or a guaranteed layer-line-free result without post-processing.

## Customer feedback

The listing provides aggregate ratings but no customer comments or aspect-specific feedback. Those figures alone do not establish which features buyers liked or any reasons for their ratings, so they offer limited guidance on print consistency, moisture handling or finishing results.

### Rating distribution

- 5 stars: 67%
- 4 stars: 33%
- 3 stars: 0%
- 2 stars: 0%
- 1 star: 0%

## Frequently asked questions

### What material is this filament?
The listing identifies it as Polyvinyl Butyral, or PVB.
### How does the listing say prints can be smoothed?
It describes IPA alcohol smoothing and also references the Polysher. The listing does not consistently specify one method, so check which process you intend to use.
### Does this filament need moisture control?
The listing says it absorbs moisture more readily than regular PLA and recommends using a drybox.
### Which print settings should I use?
The listing gives both a specific suggestion of 200˚C nozzle, 50˚C bed and 60mm/s, and broader ranges of 190-220˚C and 40-60mm/s. Confirm suitable settings for your printer and filament.

## Alternative options

- [TINMORRY Matte PLA Filament 1.75mm, PLA 3D Printing Filament, Compatible with Bambu Lab FDM 3D Printer, 1 KG 1 Spool, Matte Olive Green](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker PolyCast PVB Filament 1.75mm Natural, 0.75KG \| for Investment Casting, Casting Applications, Metal Casting Plaster, Burn Out Cleanly, Smooth Surface, 3D Printer Filament](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Creality Hyper PETG-CF Filament 1.75mm, PETG Carbon Fiber Filament for High Speed 30-600mm/s, 3D Printing Materials for Most 3D Printers K1C K2 Plus, 1kg Caramel Brown](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker PLA Pro Filament 1.75mm 1KG Brown, High-Impact Resistance \| Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [TINMORRY Rapid PETG Filament 1.75mm, 3D Printer Filament for High Speed Printing, Fits Most FDM 3D Printers, 1 KG Spool, Apricot](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker PLA Filament 1.75mm Natural 1KG Spool, Neatly Wound \| Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker Panchroma Matte PLA Filament 1.75mm Refill 1kg, Earth Brown \| Spoolless High Speed 3D Printing Filament 2.2lb, Compatible with Bambu Labs & FDM 3D Printers, Clog-Free for Reusable Spool](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [GIANTARM PLA 3D Printer Filament, Blue PLA Filament with 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging, for Most 3D FDM Printer \(PLA-New Blue\)](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Charcoal Black \| High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm](https://loonieperks.com/visit/polymaker-panchroma-matte-pla-filament-charcoal-black)
- [Revopoint 6mm 3D Scanning Markers Dots for 3D Scanners, 200 Points \| 3D Tracking Dots, Preventing Tracking Loss, Enhancing Accuracy, High Reflectivity Reference Point Stickers, Diffuse Markers](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [Polymaker PLA Pro Filament 1.75mm 1KG Metallic Silver \| Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)
- [ELEGOO TPU 95A Filament 1.75mm Translucent 1KG 3D Printer Filament \| Flexible Soft, Dimensional Accuracy, for Most FDM Printers](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)

## Add-ons

- [Polymaker PolySmooth PVB Filament 1.75mm 0.75KG Beige, Layer Line Free \| Easy to Print Like PLA, Post Process with IPA Alcoho](https://loonieperks.com/visit/polymaker-polysmooth-pvb-filament-beige-175mm-750g)

## Images

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 1](https://loonieperks.com/i/bdlsQkdoPyj97oKkScJ0dCQYZot7-ufZd73DzqX0kQmQmSC69BOs408iPNeFuaf6EU3mlODwkgBR6f-cmu-eLc6FIWSIQuuAL5UGNysbsbDJtadM7hRB3E53.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 2](https://loonieperks.com/i/PjAb4FCnu-UFfZIRXLC-ibMhx5-Rto18PjUuxBxY_qi4_e_ifu22EVPgrB8ZPcs_yLNQtDqvEHnIVzDGgAXg0r43AcQTysDaxkh54QJalAVSechrDwptl67r.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 3](https://loonieperks.com/i/qiR9jgZ9gd-Bl8Od9FkiFkw2H1Rd7bHUG719ocX_rvsd6Vn8B29wQrKNESYOR4D8_f05gog94bfqUZT_nCpWdshHPiBXDrELrkIK4dKQu7txJUklNfzCQqp4.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 4](https://loonieperks.com/i/yB88hMCPiReTAPRiDfedoYGunkQNK127HQK3Sef4PZ_J6fCFZyEWGa5Nl9N-JPYmFleaVqhNEIFJvqfHtxEAtqokjSvlAM6FYoy4IUhrwFGQSLSoJxiGhBGn.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 5](https://loonieperks.com/i/GuIvHVqIphUeRLK7xOmuM0JbsEMSR2jje5T5J4VQVNFMwNkDTU4IVmrH7GPdMSdLSgF525QiirKCpV-6tss6YCOLVPSSjxIh4hq5cP1jlt6XhreO.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 6](https://loonieperks.com/i/AT4ZLi8N80AV-gOx77IVLrTlBuRFqhyz4udE9XSYb8FMeEHqw5dML_uw9OO6fWjybEeW_DyB9OUbzwFRFOTKQA54OtTOisFqa-XWXK2B_b9fz0eovlRCmRKl.jpg)

![Polymaker PolySmooth PVB Filament, 1.75 mm, 750 g, Beige — 7](https://loonieperks.com/i/qGI2Ee0au4UygvX_cP9NJcr4EDNzaP8GrV__kr9YR7_gQxZDwZXswrDwKC4xQ71jk3cDLUHraA_cCgIsQ1tYl6fEVzCQ-M3hgstAW14QTvyQXbvBZ7P9tnI3.jpg)
