1 / 7Polymaker Panchroma Matte PLA Refill, 1.75 mm, 1 kg, Army Red
Polymaker Panchroma Matte PLA is a spoolless, 1 kg Army Red filament refill for compatible 1.75 mm FDM 3D printers. Its matte finish is intended to soften the appearance of layer lines, but you will need a compatible reusable spool for use.
At a glance
- Spoolless refill intended for compatible reusable spools, including Bambu Lab spools according to the listing.
- Matte finish is described as helping soften visible layer lines.
- Listing gives a speed ceiling and recommended nozzle and bed temperature ranges.
Pros and cons
Pros
- Refill format avoids a disposable spool and can suit an existing compatible reusable-spool setup.
- The matte surface may be useful for display models and other prints where softer-looking layer lines are desired.
- The stated temperature ranges offer starting points for print setup.
Cons
- No disposable spool is included in this refill format, so it is not ready to use without a compatible reusable spool.
Technical specifications
11 specifications| Brand | Polymaker |
|---|
| Weight listed | 1 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Format | Spoolless refill |
| Material listed | Polylactic Acid |
|---|---|
| Colour | Matte Pla Refill- Army Red |
| Dimensional accuracy | ±0.02mm |
| Maximum listed print speed | 300mm/s |
| Recommended nozzle temperature | 190-230°C |
| Recommended bed temperature | 25-60°C |
| Cooling fan | on |
What to know before buying
- Compatibility is stated for Bambu Lab spools, AMS, AMS Lite and most FDM printers, but spool fit and printer-specific settings may vary. Treat 300mm/s as a listed upper limit, not a guaranteed speed for every printer or print.
Who is it for?
A good fit for
- Makers who already use a compatible reusable spool and want Army Red matte PLA.
- FDM printing of display models, props, miniatures and other creative projects where a matte surface is preferred.
Less suited to
- Buyers who need filament supplied on a standard disposable spool.
- Users of printers that do not support 1.75 mm filament.

Customer reviews on Amazon
- 5 stars
68% 68% - 4 stars
12% 12% - 3 stars
10% 10% - 2 stars
10% 10% - 1 star
0% 0%
Aggregate ratings lean positive, with most ratings in the top category, but some lower ratings are also present. With a small rating sample and no written feedback supplied, this gives only a limited view of user experience and does not identify specific strengths or problems. For buyers, the practical fit still depends on having a compatible reusable spool and matching print settings to their printer.
Frequently asked questions
Does this refill include a spool?
The listing identifies it as a spoolless refill made for compatible reusable spools. It does not specify a spool in the supplied package information.
What printer filament size is listed?
The listing gives a filament diameter of 1.75 millimeters and describes compatibility with FDM 3D printers.
What settings does the listing recommend?
It lists a 190-230°C nozzle range, a 25-60°C bed range and the cooling fan on. These are manufacturer-provided recommendations, not verified settings for every printer.
What finish and colour is this?
It is presented as matte PLA in Army Red. The listing says the low-sheen finish can soften visible layer lines.

Alternative options

TINMORRY Matte PLA Filament 1.75mm, PLA 3D Printing Filament, Compatible with Bambu Lab FDM 3D Printer, 1 KG 1 Spool, Matte Olive Green
$24.99

Polymaker PETG Filament Refill 1.75mm, 10KG, Black | 3D Printer Filament, High-Speed 500mm/s, Spool-Free, Smooth Feeding, Low Stringing, Strong Layer Adhesion
$109.99

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Charcoal Black | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

Polymaker Panchroma Silk PLA Filament 1.75mm 1kg, Shiny Red, New and Improved Formula, Better Strength, Printing Speed and Clog-Free. Works in Most FDM and Multicolor 3D Printers.
$23.74

Polymaker PLA Pro Filament 1.75mm 1KG Brown, High-Impact Resistance | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$21.11

Polymaker PLA Filament 1.75mm Magenta 1KG Spool, Neatly Wound | Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers
$21.59

HOZO NeoSander Reciprocating Detail Sander, Mini Electric Pen Sander with 13000 SPM Linear Motion, Adjustable Stroke for Precision Sanding, Ideal for 3D Printing, Model Making, Crafts & DIY Projects
$79.99

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Earth Brown | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$12.99

Polymaker HT-PLA-GF Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$26.59

GIANTARM PLA 3D Printer Filament, Blue PLA Filament with 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging, for Most 3D FDM Printer (PLA-New Blue)
$25.99

ELEGOO ABS-Like 3D Printer Resin 3.0, 405nm UV-Curing Photopolymer Resin for LCD/DLP 3D Printing, with Enhanced Strength and Toughness, High Precision, Low Viscosity, 1000Gram Clear Red
$21.99

Polymaker HT-PLA Filament 1.75mm Red 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$21.99