1 / 7Polymaker Matte PLA Filament, Sunrise Orange, 1.75 mm, 1 kg
Polymaker Matte PLA Filament is a 1 kg spool of 1.75 mm Sunrise Orange material for FDM 3D printing. Its matte finish is intended to soften the appearance of layer lines, while customer feedback also flags some variation in consistency and tangling.
At a glance
- Matte surface finish is described as concealing print layer lines.
- Manufacturer says the filament is wound to reduce tangling and supplied dried in a resealable bag with desiccant.
- Manufacturer claims less brittleness than standard PLA and supports that break away easily.
Pros and cons
Pros
- Sunrise Orange matte finish suits prints where a less visible layer-line appearance is wanted.
- One 1 kg spool provides a stated 1.75 mm PLA format.
Technical specifications
7 specifications| Brand | Polymaker |
|---|---|
| Model | 70848 |
| Dimensions listed | 20 x 20 x 6.5 cm; 1 kg |
|---|---|
| Weight listed | 1 kg |
| Material listed | Polylactic Acid |
|---|---|
| Filament diameter | 1.75 millimeters |
| Colour | Matte Pla - 1.75mm Matte Sunrise Orange (Hex Code: #F88b17) |
What to know before buying
- The listing uses both Matte PLA and PolyTerra PLA naming, and says PolyTerra is now Panchroma. Confirm the selected colour and product revision if the label matters to your purchase. The stated dimensions also include the 1 kg weight.
Listing details to confirm
Customer feedback includes reports of brittleness, inconsistent results and tangling, despite the listing's claims about ductility and winding.
What’s in the box
Included- Polymaker PolyTerra PLA Sunrise Orange, 1.75 mm, 1 kg
Who is it for?
A good fit for
- FDM printer owners seeking 1.75 mm PLA in Sunrise Orange with a matte surface appearance.
- Makers prioritizing an understated finish that can make layer lines less noticeable.
Less suited to
- Buyers who need confirmed printer-specific compatibility, since the listing does not identify supported printer models.
- Buyers who require consistent reports of low brittleness or tangle-free feeding.

Customer reviews on Amazon
- 5 stars
77% 77% - 4 stars
11% 11% - 3 stars
4% 4% - 2 stars
2% 2% - 1 star
6% 6%
Customer feedback highlights pleasing print results and a matte appearance, while also reporting inconsistent results, brittleness and tangling. Opinions on bed adhesion and value vary. Those concerns matter for buyers relying on repeatable feeding and dependable prints, even though the listing describes the filament as less brittle and carefully wound. The aggregate ratings lean positive overall but do not establish what caused individual experiences.
Positive themes
- Customers describe attractive matte finishes and good-looking print results.
Negative themes
- Some customers report inconsistent prints, brittleness and tangling.
Mixed feedback
- Customer opinions vary on bed adhesion and value for money.
Frequently asked questions
What is the filament diameter and stated spool weight?
The listing gives a diameter of 1.75 millimeters and a weight of 1 kg.
What finish is this filament intended to produce?
The listing describes a matte finish intended to conceal print layer lines. Customer feedback also mentions the matte appearance, though results can vary.
Is this definitely labelled PolyTerra or Panchroma?
The listing uses Matte PLA and PolyTerra naming and says PolyTerra is now Panchroma. Check the selected listing's product label if the branding or revision is important.

Alternative options

Polymaker PLA Pro Filament 1.75mm 1KG Orange, High-Impact Resistance | Tough, High Speed Up to 300mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 3D Printers, No Enclosure Required
$16.72

Polymaker Panchroma Matte PLA Filament 1 .75 Refill 1kg, Savannah Yellow | Spoolless High Speed 3D Printing Filament 2.2lb, Compatible with Bambu Labs & FDM 3D Printers, Clog-Free for Reusable Spool
$12.99

Polymaker PLA Filament 1.75mm Magenta 1KG Spool, Neatly Wound | Dimensional Accuracy +/- 0.03mm, Tangle-Free, Clean Layer Finish, 3D Printer Filament Fit Most FDM 3D Printers
$21.59

ELEGOO Matte PLA 3D Printer Filament 2KG 1.75mm 2 Colors | Lavender Purple & Sunshine Yellow, Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Carboard Spool (2.2lbs) for Most FDM 3D Printers
$33.99

Polymaker HT-PLA Filament 1.75mm Red 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$21.99

Colourbing Pre-Dried Silk PLA+ 3D Printer Filament 1.75mm, Neatly Wound & Shiny Glossy Color, Smooth Printing PLA+ Filament Ideal for Christmas Decorations, Fit for Most FDM 3D Printer, 1KG Spool- Red
$23.99

Kingroon Matte PLA Filament, 1.75mm, 1kg Spool, Orange, 3D Printer Filament
$37.28

Polymaker Panchroma Matte PLA Filament 1.75mm, 1kg, Charcoal Black | High Speed 3D Printing Filament Fits for Most FDM 3D Printers, Smooth Finish & Hide Layer Lines, Accuracy +/- 0.02mm
$18.47

Polymaker PLA Pro 3D Printing Filament Black 1KG, High-Impact Tough PLA, Fast Printing up to 300mm/s, Easy to Print, No Enclosure Required, High Speed New Formula, Formerly Polysonic PLA Pro
$21.11

ELEGOO Matte PLA 3D Printer Filament Matte Black 2KG 1.75mm | Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Carboard Spool (2.2lbs) for Most FDM 3D Printers
$32.29

ANYCUBIC PLA Plus 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, PLA+ Filament with Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Texture Grey
$18.04

kexcelled Clear PETG Filament 1.75mm,High Light Transmittance Transparent PETG 3D Printer Filament 1kg Spool (2.2lbs), Dimensional Accuracy +/-0.03mm,Fit Most FDM Printer
$25.88