Loonie PerksDeals for Canada
Search
Product guide

Nilight 90353A 12 V Momentary RV Stabilizer Jack Switch

Nilight 90353A is a panel-mount rocker switch listed for extending and retracting RV stabilizer jacks. Its momentary action returns to off when released, so the control must be held during movement. The listing also describes use with other DC loads, but buyers should confirm the switch’s electrical configuration and fit with their equipment.

At a glance

  • Momentary rocker action is described as returning to off when released.
  • Listed for controlling RV stabilizer jacks and other DC loads such as motors and linear actuators.
  • Panel-mount design with listed dimensions of 25 x 51 x 25 millimeters.
  • Product description says the switch has a sealed back to help protect internal components from dirt, dust and rain.
Price
$28.50Save 12%

Reference price: $32.39

Price checked: Nov 17, 2026

View offer

Often bought together

Pros and cons

Pros

  • Momentary extend/retract control avoids leaving the switch latched in an operating position, according to the listing.
  • The stated 12-volt, 20 A rating gives buyers key figures to compare against their installation.
  • The product description claims a harness and mounting screws are supplied, which may reduce separate parts sourcing.

Technical specifications

23 specifications
Identity and electrical ratings
BrandNilight
Model90353A
Operating voltage12 volts
Current rating20 A
Wattage240 watts
Operation modeON-OFF-ON
Contact typeNormally Closed
Circuit type3-way
Controls and connections
Switch typeRocker
Number of positions3
Control method listedTouch
Connectivity protocol listedX-10
Connector typePlug In
TerminalScrew
Installation and dimensions
Mounting typePanel Mount
Dimensions25 x 51 x 25 millimeters
Materials and protection
MaterialAluminum
Contact materialSilver
International protection ratingIP65
Specification metCE
Upper temperature rating80 °C
Listed compatibility
Vehicle typeRV
Compatible devicesRV, Camper, Caravan, Motorhome, Van, Trailer

What to know before buying

Listing details to confirm

Listing details are inconsistent or unconfirmed: the product copy describes a heavy-duty DPDT reverse-polarity switch, while its technical fields list SPST and Normally Closed, alongside a three-way circuit and four-pin connector. Protection is listed as both IP65 and IP66, and the listed X-10 protocol and Touch control are not explained for this wired rocker. Confirm the switch configuration, rating, pinout, protection level and physical fit against the intended jack before buying. The product copy says momentary action returns to off when released.

What’s in the box

  • Switch setIncluded
  • Wiring harnessCheck selected pack
  • Mounting screws, 4Check selected pack
  • Wiring diagramCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • RV owners replacing a panel-mounted stabilizer-jack control who can verify the pinout, dimensions and electrical requirements.
  • Buyers seeking a momentary rocker to control a compatible 12-volt DC load.

Less suited to

  • Installations requiring a latching switch or a confirmed configuration that cannot be matched to the listing’s inconsistent electrical details.
  • Buyers who need verified compatibility with a specific jack model without checking its wiring and fit.
Nilight 90353A 12 V Momentary RV Stabilizer Jack Switch · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 65 ratings
  • 5 stars80%80%
  • 4 stars11%11%
  • 3 stars2%2%
  • 2 stars2%2%
  • 1 star5%5%

Aggregate customer ratings are mostly in the five-star category, with a smaller spread across lower ratings. This indicates a generally favourable rating pattern but does not explain what customers liked or disliked. The ratings do not resolve the listing’s conflicting wiring and switch-type details, which are important to verify for a replacement installation.

Frequently asked questions

Does the switch stay on after it is released?

The product description says it is momentary and returns to off when released, so the rocker must be held while operating the load.

Is this a confirmed replacement for a particular stabilizer jack?

The listing names RV stabilizer jacks and certain applications, but it does not establish compatibility with every model. Check dimensions, pinout and electrical configuration against your jack.

What electrical configuration should I expect?

The listing conflicts: it calls the switch DPDT in the product copy, but specifies SPST, Normally Closed and a three-way circuit elsewhere. Confirm the exact configuration and wiring before installation.

Nilight 90353A 12 V Momentary RV Stabilizer Jack Switch · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.0
OTTOCAST Mini Tube CP88-T3 Wireless CarPlay and Android Auto Adapter
OTTOCAST Mini Tube CP88-T3 Wireless CarPlay and Android Auto Adapter

C$53.24

C$42.98

-19%
-19%
Product details in Markdown