Loonie PerksDeals for Canada
BlogSearch
Product guide

NEEWER MS007 Low-Profile Microphone Boom Arm

NEEWER MS007 is a low-profile desk-clamp microphone boom arm intended to position a mic below a monitor while keeping the screen view clear. Its aluminum construction, cable channels and included thread adapters suit podcasting, streaming and recording setups, though the listed 3.3 lb load limit and mixed feedback on adjustability are worth considering.

At a glance

  • Low-profile dual-arm layout is described as fitting beneath a monitor without blocking the screen or lens view.
  • Wrench-adjusted damping hinge is intended to hold a microphone steady, with a stated maximum load of 3.3 lb/1.5 kg.
  • Arm rotation, tilt and a swivelling ball head offer multiple positioning adjustments.
  • Built-in channels route standard USB and XLR cables, with straps for thicker cables.
  • Supplied thread adapters cover 1/4", 3/8" and 5/8" mounting connections.
Price
$49.59Save 26%

Reference price: $66.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Low-profile placement can help preserve monitor visibility and desk space.
  • Aluminum arm and included cable-routing features support a tidier microphone setup.
  • The stated movement range and ball head allow adjustment of microphone position and angle.
  • The listed adapter set supports several common thread sizes.

Cons

  • The stated maximum load of 3.3 lb/1.5 kg may rule out heavier microphone and mount combinations.
  • The clamp is specified for desks 0.4 to 2.4 in / 1 to 6 cm thick, so desks outside that range are not covered by the stated fit.

Technical specifications

18 specifications
Identity
BrandNEEWER
ModelMS007
StyleMS007 w/Upgraded Cable Management
ColourBlack
Build and installation
Material listedAluminum
Weight listed1.5 kg
Base typeDesk Clamp
Desk thickness range0.4 to 2.4 in / 1 to 6 cm desks
Maximum load3.3 lb/1.5 kg load
Reach and movement
Maximum height26.5 inches
Arm sectionstwo 14.8 in / 37.6 cm arms
Maximum extension26.5 in / 67.3 cm
Heightening pole5.9 in / 15 cm heightening pole
Arm rotation and tilt360 degree horizontal rotation and 100 degree tilt
Ball head movementswivels 360 degrees and tilts 90 degrees
Mounting and cable management
Mount threads and adaptersTop 1/4" screw, 1/4" to 3/8" and 1/4" to 5/8" adapters
Cable routingBuilt in channels hold standard USB data cables and XLR audio cables
Cable ties4 included straps help secure thicker cables

What to know before buying

Listing details to confirm

Confirm the microphone, shock mount and any other attached hardware stay within the stated 3.3 lb/1.5 kg load, and verify the desk falls within the stated clamp range. The product details call the unit 1.5 kg, while the load claim is 3.3 lb/1.5 kg, so do not treat the item weight as its capacity. Customer feedback is generally favourable about build, stability and function, but adjustability experiences are mixed.

What’s in the box

Included
  • Microphone boom arm
  • Heightening pole
  • Table mounting C-clamp
  • 1/4" to 3/8" screw adapter
  • 1/4" to 5/8" screw adapter
  • 2 x L-shaped hex wrench
  • 4 x cable tie

Who is it for?

A good fit for

  • Podcast, streaming or recording desks where a low-profile arm can keep the monitor area clear.
  • Setups that need cable routing and adapters for microphones or compatible mounts with 1/4", 3/8" or 5/8" threads.
  • Desks within the stated clamp thickness range and microphone assemblies within the stated load limit.

Less suited to

  • Microphones and accessories exceeding the stated 3.3 lb/1.5 kg load.
  • Desks thinner than 0.4 in or thicker than 2.4 in, based on the listed clamp fit.
NEEWER MS007 Low-Profile Microphone Boom Arm · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 588 ratings
  • 5 stars78%78%
  • 4 stars8%8%
  • 3 stars7%7%
  • 2 stars3%3%
  • 1 star4%4%

Customer feedback highlights perceived build quality, sturdiness, stability, functionality and appearance, with reports that the arm stays secured in place. Adjustability receives mixed feedback, which matters if you expect frequent repositioning. The listing describes 360-degree horizontal rotation and 100-degree tilt, but those specifications do not resolve differing user experiences. Overall rating data is mostly positive, though ratings alone do not explain individual concerns.

Positive themes

  • Customers report positive impressions of build quality and sturdiness.
  • Feedback describes the arm as stable and functional, with positive comments about appearance.

Mixed feedback

  • Customer feedback is mixed on adjustability.

Frequently asked questions

How much weight does the MS007 support?

The listing states a maximum load of 3.3 lb/1.5 kg. Include the microphone and any attached mount or accessories when checking the load.

Will the clamp fit my desk?

The stated desk thickness range is 0.4 to 2.4 in / 1 to 6 cm. The listing does not establish fit outside that range.

Which microphone threads are supported?

The listing describes a top 1/4" screw and adapters for 3/8" and 5/8" connections. Check your microphone or mount's thread before ordering.

Does it include cable ties and mounting adapters?

The listed contents include two screw adapters and four cable ties, along with the arm, heightening pole, table C-clamp and two L-shaped hex wrenches.

NEEWER MS007 Low-Profile Microphone Boom Arm · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.8
RØDE WS14 Pop Filter for PodMic and PodMic USB, Black
RØDE WS14 Pop Filter for PodMic and PodMic USB, Black

C$48.85

C$39.99

-18%
-18%
Product details in Markdown