1 / 7Little Giant 4-MDQX-SC Aquarium Pump, 115 V, 1225 GPH
Little Giant 4-MDQX-SC is a corded, non-submersible magnetic-drive pump intended for inline aquarium circulation and filtration. Its listed flow of 1225 GPH is specified at a 3-foot lift, and installation requires the intake below the liquid level because the pump is not self-priming.
At a glance
- Non-submersible magnetic-drive design for inline aquarium circulation and filtration.
- For saltwater and freshwater applications, with a stated 1225 GPH flow at 3-foot lift.
- The listing describes the motor as thermally protected and rated for continuous duty.
Pros and cons
Pros
- The stated flow figures include performance at several lift heights, helping buyers compare expected flow with their installation needs.
- Saltwater and freshwater use is specified, along with corrosion-resistant construction claims.
Cons
- Not self-priming, so it cannot be set up as a submerged pump or used where the intake is above the liquid level.
- Bearings require periodic lubrication, adding maintenance beyond installation.
Technical specifications
24 specifications| Brand | Little Giant |
|---|---|
| Model | 582507 |
| Maximum flow rate | 22 gpm |
|---|---|
| Flow at 3-ft. lift | 1,225 gph (4.637 lph) |
| Maximum lifting height | 17 feet |
| Suction connection | 1-inch FNPT |
| Discharge connection | 1-inch MNPT |
| Power configuration | Corded Electric |
|---|---|
| Voltage | 115 volts |
| Motor | 1/10 hp |
| Frequency | 60 Hz |
| Amperes | 1.3 Amps |
| Wattage | 145 Watts |
| Cord length | 6-foot cord with plug |
| Material listed | Polypropylene (PP) |
|---|---|
| Pump head | glass-filled polypropylene |
| Shaft and thrust washers | ceramic spindle shaft and thrust washers |
| Impeller | coated ceramagnet A (barium ferrite) ceramic impeller |
| Seals | nitrile o-ring seals |
| Motor protection | thermally protected |
| Certification claim | CSA listed in the USA and Canada |
| Dimensions | 10.74" x 5.46" x 5.25" (273 mm x 139 mm x 133 mm) |
|---|---|
| Weight | 10 lbs (4.54 kg) |
| Required maintenance | To ensure your pump operates at it's fullest potential, the motor's sleeve bearings needs to be LUBRICATED every six months with two to three drops of S.A.E. 20-weight, non-detergent oil. The small oil holes are located on top at each end of the motor. |
What to know before buying
Listing details to confirm
The listing gives conflicting dimensions: 27.3L x 9.9W x 13.9H centimetres versus 10.74" x 5.46" x 5.25" (273 mm x 139 mm x 133 mm), and the listed mass appears only with the latter. Flow-rate entries also use different descriptions and units, including 22 gpm and 1225 GPH at a 3-foot lift, so confirm the desired rating and fit before buying. The pump must be installed outside and below the liquid source, with the intake below the liquid level, and its sleeve bearings require lubrication every six months.
What’s in the box
Included- Installation manual
- Pump with 6-ft. cord and plug
Who is it for?
A good fit for
- Aquarium or aquaponics setups needing an inline circulation or filtration pump and having an installation point below the water source.
- Buyers who can accommodate a corded 115 V pump and routine bearing lubrication.
Less suited to
- Setups requiring a submersible or self-priming pump.
- Installations where the pump intake cannot sit below the liquid level.

Customer reviews on Amazon
- 5 stars
62% 62% - 4 stars
10% 10% - 3 stars
12% 12% - 2 stars
3% 3% - 1 star
13% 13%
Customer feedback highlights reported satisfaction with performance and quality, while noise opinions are mixed. That feedback may matter for aquarium placements near living areas, but does not establish a particular noise level. The pump's intended inline use, non-self-priming setup and stated lift-specific flow are important practical considerations regardless of customer impressions.
Positive themes
- Customers report positive impressions of performance and quality.
Mixed feedback
- Customers express mixed opinions about noise level.
Frequently asked questions
Can this pump be submerged?
No. It is described as non-submersible and for inline use, with the pump outside and below the water source.
Does it prime itself?
No. The listing says it is not self-priming and requires the volute intake below the liquid level.
What flow rate should I expect?
The listing specifies 1225 GPH at a 3-foot lift and provides other lift-specific flow figures. Actual flow depends on lift and installation.
What maintenance does it require?
The manufacturer details call for lubricating the motor's sleeve bearings every six months with two to three drops of S.A.E. 20-weight, non-detergent oil.

Alternative options

Pawfly 400 GPH Submersible Water Pump 25W 7ft. High Lift Quiet Pump with 6ft Power Cord for Fountain Aquarium Fish Tank
$23.99

VIVOSUN 5300GPH Sub Water Pump for Pond Waterfall, Statuary, Hydroponics | 310W Pond Pump, Ultra Quiet Aquarium Pump with 20FT. Lift Height for Fish Tank
$131.99

Pawfly Aquarium 80 GPH Submersible Water Pump 4 W Compact Quiet Pump with 2.6 ft. High Lift for Indoor Buckets Fish Tanks and Fountains up to 50 Gallons
$13.99

WASSERMANN 12 Volt RV Water Pump 3.0GPM 55PSI,Replacement for 4008-101-A65/E65,Water Pump Self Priming Diaphragm Pump with Pressure Switch for RV Kitchen Bathroom Marine Yacht Garden
$98.99

VIVOSUN 480GPH Submersible Fountain Water Pump for Pond, Aquarium, Statuary | 1800L/H, 25W, Ultra Quiet Water Pump with 7.2ft High Lift and 5ft Power Cord, 3 Nozzles for Fish Tank, Hydroponics Black
$29.03

Pawfly Aquarium 1000 GPH Submersible and Inline Water Pump 80W 10ft High Lift AC 120 V Quiet Return Pump with 10 ft. Power Cord for Large Fish Tanks Pond Waterfalls Fountains Sumps and Gardens
$72.99

VIVOSUN 9000GPH Sub Water Pump for Pond Waterfall, Statuary, Hydroponics | 620W Pond Pump, Ultra Quiet Aquarium Pump with 26.5FT. Lift Height for Fish Tank
$158.39

VIVOSUN 800GPH Submersible Fountain Water Pump for Pond, Aquarium, Statuary | 3000L/H, 50W, Ultra Quiet Water Pump with 10ft. High Lift and 6.5ft. Power Cord, 3 Nozzles for Hydroponics
$31.67

VIVOSUN 660GPH Sub Water Pump for Fish Tank, Pond, Aquarium, Hydroponics | 40W Submersible Pump, Water Pump with 5ft Power Cord and 4 Nozzles Blue
$26.39

VIVOSUN 3700GPH Submersible Water Pump with Barrier Bag for Pond Waterfall | Ultra Quiet 300W Pond Pump for Fish Tank, Statuary, Hydroponics, 21Ft. Lift Height
$123.19

Number-One Submersible Water Pump, 90GPH(350L/H, 4W) Water Fountain Pump Portable Water Pump Submersible Pump with 5.9ft Power Cord, 2 Nozzles for Fish Tank, Aquarium, Statuary, Hydroponics
$18.99























