Honcaring Epoxy Resin Kit, 34 oz

The Honcaring Epoxy Resin kit is a two-part, 34 oz clear resin set intended for small craft and decorative projects. Its 1:1 volume mix and included mica powders and tools make it a ready-to-start option, but the product information cautions against flat work requiring precise dimensions or high hardness.

At a glance

Two-part resin and hardener are described as 17 oz each, mixed at a 1:1 volume ratio.
The manufacturer suggests casting, coating, flower preservation, jewellery, coasters and other small decorative crafts.
Six mica powders and basic measuring and mixing tools are listed in the kit contents.
The product guidance recommends shallow pours and says full curing can take 24–48 hours.

Price

$27.99Save 20%

Reference price: ~~$34.99~~

Price checked: Nov 13, 2026

View offer Ahead of Black FridayExplore the selection

Often bought together

Roizefar Mica Powder, 12 Colors Pearlescent Resin Pigment for Candle Crafts | Epoxy Resin Color, Glitter Powder for Resin Dye, Shimmering Pigment Powder for Slime, Jewelry Making & DIY Projects, 5g Each

$17.99

Pros and cons

Pros

The stated kit contents include mixing supplies, gloves and six mica powders, reducing the need to source those items separately.
Its 1:1 volume ratio and stated curing guidance provide a defined process for small craft pours.
The manufacturer says it cures to a clear finish and has a mild odour during application.

Cons

The manufacturer does not recommend it for flat pieces that need high hardness, precise dimensions or very flat surfaces.
The stated working window for mixes under 150mL is approximately 30–40 minutes, requiring prompt measuring, mixing and pouring.

Technical specifications

10 specifications

Identity
Brand	Honcaring
Model	Epoxy Resin 34oz-CA-XC
Colour	Clear
Total kit volume	34oz
Mix ratio by volume	1:1

Use and curing
Working time for volumes under 150mL	approximately 30–40 minutes
Typical curing time	24–48 hours
Recommended ambient temperature	21-24°C (70-75°F)

Dimensions and installation
Weight listed	1.41 kg
Parcel dimensions	17.8 x 14.9 x 11.3 cm; 1.41 kg

What to know before buying

Listing details to confirm

The listing says to use a 1:1 ratio by volume but gives 1.25:1 by weight, so do not substitute one measuring method for the other. It also calls for curing in approximately 24 hours in one feature while giving a typical 24–48-hour cure elsewhere. The stated 34 oz total corresponds to two 17 oz components, and the product is described as unsuitable for precision-flat, high-hardness work. Temperature, layer thickness and mix volume affect handling and curing.

Who is it for?

A good fit for

Crafters making small decorative castings, coasters, jewellery or embellishments.
Buyers who want resin, hardener, mica powders and basic mixing tools in one kit.
Users able to measure carefully, mix thoroughly and allow adequate curing time.

Less suited to

Projects needing dimensionally precise or very flat surfaces.
Flat pieces requiring high hardness, or projects needing deep pours without layering.
Work that cannot accommodate careful temperature, ratio and curing-time control.

Honcaring Epoxy Resin Kit, 34 oz · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 96 ratings

5 stars67%67%
4 stars18%18%
3 stars6%6%
2 stars5%5%
1 star4%4%

Customer feedback describes the resin material positively and reports perceived value, including customers saying they would buy it again. Views on reliability vary. For small craft projects, the favourable material comments may be relevant, while mixed reliability feedback makes consistency an important consideration. Aggregate ratings lean positive overall but do not establish performance for a particular project.

Positive themes

Customer feedback speaks positively about the material.
Customers report good value and willingness to buy again.

Mixed feedback

Opinions on reliability vary.

Frequently asked questions

What is included in the kit?

The listing describes 17 oz of resin, 17 oz of hardener, four rubber gloves, five 8 oz measuring cups, ten mixing cups, four stirring sticks, one plastic scraper and six mica powders.

What mixing ratio should I use?

The manufacturer specifies equal volumes of resin and hardener. It separately gives a 1.25:1 resin-to-hardener ratio by weight, so follow the correct ratio for the measuring method you use.

How long does the resin take to cure?

The product information gives a typical full cure of 24–48 hours and also says to allow approximately 24 hours. Cooler conditions can extend demoulding time.

Is this suitable for flat precision pieces or deep pours?

The manufacturer does not recommend it for flat work requiring high hardness, precise dimensions or very flat surfaces. It also recommends shallow layers of 1/8" - 1/4" (approx. 0.3 - 0.6 cm) and layering thicker projects.