1 / 6HARFINGTON Double-Split Shaft Collars, 16 mm Bore, 4-Pack
Bore Pack: HARFINGTON double-split shaft collars are listed as a four-piece set for 16 mm shafts, with a set-screw clamp-on design. The 35 mm outside diameter and 12 mm width suit positioning, stopping or spacing applications, while the aluminum construction is intended for low axial loads and simple positioning.
At a glance
- Two-piece split construction is described as spreading pressure over more of the shaft than a one-piece collar, reducing the risk of shaft damage or deformation.
- Set screws allow the collars to slide onto a shaft and be tightened in place, with adjustment possible by loosening and repositioning.
- The listing describes uses including stops, spacers and positioning or holding timing pulleys.
Reference price: $17.99
Price checked: Nov 18, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- Four collars are listed for one 16 mm shaft size, with 35 mm outside diameter and 12 mm width.
- The double-split design is intended to distribute clamping pressure more evenly than a one-piece collar.
- Aluminum alloy construction keeps the listed collars lighter than a steel collar of the same design would be, although no comparative weight is provided.
Cons
- The listing frames the set-screw design for low axial loads and simple positioning, so it is not presented as a high-load fastening solution.
Technical specifications
12 specifications| Brand | HARFINGTON |
|---|---|
| Part number | hta230706hh000629 |
| Set quantity | 4pcs |
| Bore / shaft fit | 16mm Bore |
|---|---|
| Outside diameter | 35mm / 1.38inch |
| Width | 12mm / 0.47inch |
| Set-screw type | socket cup-point setscrew |
| Weight listed | 120 g |
| Parcel dimensions | 14.4 x 9.9 x 1.6 cm; 120 g |
| Material | 6061 aluminum alloy |
|---|---|
| Surface finish | anodization |
| Intended load / positioning | low axial loads and simple positioning |
What to know before buying
- The manufacturer describes these collars as suitable for hard and soft shafts, but also says set-screw holding power improves when the shaft is softer than the screw material. Treat the stated use as low axial load and check shaft fit and load requirements before selecting them.
Who is it for?
A good fit for
- People fitting 16 mm shafts who need multiple collars for stops, spacers or pulley positioning.
- Machine-tool and general machinery users whose application calls for adjustable positioning under low axial loads.
Less suited to
- Applications requiring a specified high axial load capacity, since none is provided and the listing only describes low-load positioning.
- Shafts that are not 16 mm in diameter or installations requiring a different collar width or outside diameter.

Customer reviews on Amazon
- 5 stars
65% 65% - 4 stars
19% 19% - 3 stars
10% 10% - 2 stars
3% 3% - 1 star
3% 3%
Customer feedback is positive about usefulness, quality and value. That is relevant for buyers considering a four-collar set for routine positioning, but it does not establish load capacity or suitability for demanding applications. The aggregate ratings are mostly at the upper end, with some lower ratings, and do not explain individual experiences.
Positive themes
- Customers describe the collars as useful and functional.
- Customer feedback describes the quality positively and considers it good for the price.
Frequently asked questions
What shaft size do these collars fit?
The listing specifies a 16 mm bore for a 16 mm shaft.
What are the listed collar dimensions?
The outside diameter is 35 mm and the width is 12 mm.
How is each collar secured?
The listing describes a socket cup-point set screw. Slide the collar onto the shaft and tighten the screw to hold it in position.
What applications are described?
The listing names stops, spacers and positioning or holding timing pulleys, and characterizes the design for low axial loads and simple positioning.

Alternative options

uxcell 4pcs Double Split Shaft Collars 20mm Carbon Steel Black Oxide | Two-Piece Clamping Collar, 40mm OD 12mm Thickness, Lock Clamp with Set Screws
$25.99

HARFINGTON 2pcs Double Split Shaft Collar for 15mm Shaft Set Screw Clamp-On Collars, 35mm OD, 12mm Width, for Stoppers, Position, Hold Timing Pulleys, Machine Tools, Industry, Anodization
$13.09

MECCANIXITY 4 Pcs Plastic Shaft Collar, 18mm Bore 30mm OD x 10mm Thick Screw Style Bore Shaft Collars for Linear Hydraulic Cylinder Mechanical Automotive Industrial
$16.99

MECCANIXITY 2 Pack Shaft Collar, 1/2" Bore Double Split Aluminum Alloy Axle Collars 1-3/16" OD 9/16" Thick Locking Ring for Industry CNC Machine Tools, Gearbox Assemblies, Silver
$17.49

MECCANIXITY Shaft Collar 7/8" Bore Double Split Carbon Steel Clamping Collar Shaft Collars with Set Screw Black 4 Pack
$29.89

uxcell 4pcs Double Split Shaft Collar for 1-1/16" Shaft, Black Oxide Steel | 1-7/8" OD, 1/2" Width, Two-Piece Clamping Collar Lock Clamp, Set Screw Style
$38.19

uxcell 2Pcs Double Split Shaft Collar 3/4" Bore, 1-1/2" OD, 2024 Aluminum | Two-Piece Clamping Collar, Clamp-On Set Screw Collars
$15.49

20Amp Power Strip Heavy Duty, Long Metal 8-Outlets, Black, 6FT 1200J | 20a Surge Protector, Wall Mount Extension Cord for Industrial, 5-20P T-Plug & 5-20R T-Slot, with a 15A adapter
$56.99

Hsoryrt Cable Zip Ties 6 inch, 1000pcs Cable Ties Black, 40lbs Multi-Purpose Self-Locking Nylon Small Cable Management, UV Resistant Wire Ties, 150mm / 15cm Plastic Ties for Home, Garden, Workshop
$17.97

DTECH DB9 Male Breakout Board, RS232 Screw Terminal Adapter | Serial Adapter Solderless Module with Screw Terminals Block, Case, Long Bolts and Tail Pipes (DB9 Male + Long Bolts)
$13.99

uxcell 2pcs Double Split Shaft Collars 35mm Carbon Steel Black Oxide | Two-Piece Clamping Collar, 50mm OD 15mm Thickness, Lock Clamp with Set Screws
$21.49

HARFINGTON 2pcs Double Split Shaft Collar for 16mm Shaft Set Screw Clamp-On Collars, 35mm OD, 12mm Width, for Stoppers, Position, Hold Timing Pulleys, Machine Tools, Industry, Anodization
$13.99
























