1 / 7Geeetech Metal Green PETG Filament, 1.75 mm, 1 kg
Geeetech Metal Green PETG filament is a 1.75 mm spool marketed for most FDM printers. Its metallic finish and claimed layer adhesion make it a candidate for decorative prints and functional prototypes, while the listing recommends drying the filament for best finish.
At a glance
- Metallic green PETG with a 1 kg spool listed for use with most FDM printers.
- The listing claims enhanced layer adhesion and impact resistance, plus precision diameter control.
- For the advertised metallic finish, the seller recommends use within one week of opening or drying at 176°F (80°C) for 4–6 hours.
Often bought together
Pros and cons
Pros
- Metallic green appearance is suited to decorative models and cosplay props.
- The 1.75 mm format is stated to work with most FDM printers, so the listing does not require specialized hardware.
- A 1 kg spool provides material for multiple prints, depending on their size and settings.
Cons
- The listing's drying recommendation adds preparation if the spool has been open for more than a week or is stored for an extended period.
Technical specifications
5 specifications| Brand | GEEETECH |
|---|
| Material listed | Polyethylene Terephthalate Glycol |
|---|---|
| Filament diameter | 1.75 millimeters |
| Colour | Metal Green 1kg |
| Special features | Enhanced Layer Adhesion & Impact Resistance, Metallic Shine, Precision Diameter Tolerance |
|---|
What to know before buying
- The metallic-finish advice is to use the filament within one week after opening or dry it at 176°F (80°C) for 4–6 hours, and re-dry as needed during extended storage. The listing describes tolerance as both “Precision Diameter Tolerance” and “±0.02mm” without further detail.
Who is it for?
A good fit for
- FDM printer owners seeking metallic green PETG for decorative models, props or prototypes.
- Buyers comfortable following the listed drying guidance to target the metallic finish.
Less suited to
- Buyers who need a confirmed durability or adhesion outcome, since customer feedback on these aspects is mixed.
- Users whose printer does not support 1.75 mm filament.

Customer reviews on Amazon
- 5 stars
72% 72% - 4 stars
14% 14% - 3 stars
3% 3% - 2 stars
1% 1% - 1 star
10% 10%
Customer feedback reports that the filament prints well and behaves much like regular PETG, while also noting durability concerns and mixed experiences with consistency, reliability, adhesion, colour and appearance. For buyers choosing it for the metallic green look, variability in colour or appearance may matter as much as printability, and the durability feedback cautions against treating the listing's impact-resistance claim as a guaranteed result.
Positive themes
- Feedback describes good printability and behaviour similar to regular PETG.
Negative themes
- The feedback summary reports durability issues.
Mixed feedback
- Experiences are mixed regarding consistency, reliability, adhesion, colour and appearance.
Frequently asked questions
What kind of filament is this?
The listing identifies it as PETG, with a 1.75 millimeter diameter and Metal Green colour.
What printers is it intended for?
The listing says it works with most FDM printers and does not require specialized hardware. Check that your printer accepts 1.75 mm filament.
Does the filament need to be dried?
For the best metallic finish, the listing advises using it within one week of opening or drying it at 176°F (80°C) for 4–6 hours. It says to re-dry as needed for extended storage.
What do customers report about printing and durability?
Feedback describes good printability and behaviour similar to regular PETG, but mentions durability concerns. Opinions are mixed on consistency, reliability, adhesion, colour and appearance.

Alternative options

GEEETECH PLA Filament 1.75mm, 3D Printer Filament Metal-Like Shiny Silver 1Kg(2.2lbs), 3D Printing Filament for Most 3D Printer, High Accuracy +/- 0.02mm, Silk Silver
$23.75

TINMORRY Metallic PETG Filament 1.75mm, Rapid PETG 3D Printer Filament, Compatible with Bambu FDM 3D Printer, 1 KG 1 Spool, Metallic Midnight Green
$17.13

ELEGOO PLA 3D Printer Filament Glow in The Dark Glow Green 1KG 1.75mm | 3D Printing Filament Luminous Color 1kg(2.2lbs) Spool, Fits for Most 3D Printers
$24.29

ANYCUBIC PETG Filament 1.75mm,3D Printer Filament,Dimensional Accuracy +/- 0.02mm,Exceptional Toughness,Print with Most FDM 3D Printers,1KG Spool,Forest Green
$20.69

PlastKyro Metallic Bronze PLA Filament 1.75mm, Silk Antique Gold PLA 1KG | 3D Printer Filament, Shiny Metal Finish with Realistic Luster, Dimensional Accuracy ± 0.02mm 2.2lbs
$45.14

ELEGOO PLA Filament 1.75mm Galaxy Peacock Blue 1KG 3D Printer Filament | Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) 3D Printing Filament, Fits for Most FDM 3D Printers
$22.94

GEEETECH Silk Dual Color PLA Filament 1.75mm 3D Printer Filament 1Kg(2.2lbs), Coextrusion Metallic Metal-Like Shiny 3D Printing Filament for Most 3D Printer, High Accuracy +/-0.02mm, Silk Blue Green
$23.40

ANYCUBIC PETG Filament 1.75mm,3D Printer Filament,Dimensional Accuracy +/- 0.02mm,Exceptional Toughness,Print with Most FDM 3D Printers,4KG Spool,Black
$50.99

ANYCUBIC PLA Plus 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, PLA+ Filament with Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Texture Grey
$18.04

ANYCUBIC ABS Filament 1.75mm, 1KG Spool (2.2 lbs), Black | 3D Printer Filament, High Impact & High Temperature Resistant, Fits for Most FDM 3D Printers
$21.59

JAYO 3D Printer Silk PLA Filament 1.75mm 1.1KG, Silk Red Copper | Smooth Silky Surface,Dimensional Accuracy +/- 0.02mm, Great Easy to Print for 3D Printers
$19.99

GEEETECH Shiny Silk Pearl White PLA Filament 1.75mm | Metallic 3D Printer Filament 1Kg(2.2lbs), Metal-Like & Smooth Finish, High Accuracy +/- 0.02mm
$25.64
