
DEWALT DAFE1H0610 3 in, 60-Grit Flap Wheel
The DEWALT DAFE1H0610 flap wheel is a 3-inch, 60-grit abrasive for die grinders, with a 1-inch width and 1/4-inch shaft listed. Its coarse aluminum oxide abrasive is suited to buyers seeking material removal rather than a finer finishing grit.
At a glance
- Coarse 60 grit is positioned for material removal rather than fine sanding.
- The listing specifies a 3-inch wheel with a 1-inch width and 1/4-inch shaft arbor.
- The manufacturer claims aluminum oxide grain for fast material removal and cloth intended to provide long wheel life.
Pros and cons
Pros
- The 1/4-inch arbor and die-grinder compatibility provide a clear fit specification to compare with the tool before purchase.
- A stated 20,000 rpm maximum gives a speed limit to check against the grinder's operating speed.
Cons
- The 60-grit coarse abrasive is a trade-off for users looking for a finer finishing surface.
Technical specifications
16 specifications| Brand | DEWALT |
|---|---|
| Model | DAFE1H0610 |
| Dimensions listed | 7.6 x 27.9 x 6.7 centimetres |
|---|---|
| Wheel diameter | 3 inches |
| Width | 1-inch wide |
| Shaft arbor | 1/4-inch shaft arbor |
| Thickness | 0.25 inches |
| Compatible device | Die Grinder |
| Grit material | Aluminum Oxide |
|---|---|
| Grit number | 60 |
| Grit type | Coarse |
| Construction | Coated |
| Recommended uses | Grinding, Cutting, Material Removal |
| Compatible materials | Metal, Wood, Plastic |
| Maximum rotational speed | 20000 rpm |
| Material listed | Blend |
|---|
What to know before buying
Listing details to confirm
Listing details are inconsistent: the supplied dimensions are 7.6 x 27.9 x 6.7 centimetres, while the title and feature claims specify a 3-inch diameter, 1-inch width and 1/4-inch arbor. Confirm the selected listing's measurements before ordering.
What’s in the box
Included- 3-inch x 1-inch x 1/4-inch HP 60-grit flap wheel
Who is it for?
A good fit for
- Die-grinder users who need a coarse flap wheel for material removal on listed metal, wood or plastic materials.
- Buyers matching a 3-inch wheel and 1/4-inch shaft arbor to their tool.
Less suited to
- Users seeking a fine-grit wheel for a smoother finishing pass.
Customer reviews on Amazon
- 5 stars
68% 68% - 4 stars
10% 10% - 3 stars
11% 11% - 2 stars
6% 6% - 1 star
5% 5%
The available aggregate ratings lean positive, but also include three- and lower-star ratings. Without comment-level feedback, they do not explain why customers rated the wheel as they did. For buyers considering its listed coarse 60 grit and die-grinder fit, the ratings offer only a limited general signal, not confirmation of performance or compatibility.
Frequently asked questions
What grit is this flap wheel?
The listing specifies 60 grit and describes it as coarse.
What tool does it fit?
The listing names a die grinder and specifies a 1/4-inch shaft arbor. Match the arbor and the tool's speed to the wheel's listed 20,000 rpm maximum.
What are its listed dimensions?
The title and feature claims give a 3-inch diameter and 1-inch width, while the dimensions field lists 7.6 x 27.9 x 6.7 centimetres. Confirm the relevant measurements on the selected listing.
Alternative options

SHALL 25-Pack Cut Off Wheels 3” x 3/8” x 3/64” - Ultra Thin Cutting Wheel with Pouch for Angle Grinder & Cut-Off Tools - Fast Cutting Disc for INOX, Steel, Iron, Non-Ferrous Metal & PVC
$24.99

AOKLIT 4 Pack Non-Woven Abrasive Flap Wire Drawing Polishing Burnishing Wheel 4.5" x 4" for The Surface Treatment of Metal Products
$63.99

BHA Aluminum Oxide Shank Mounted Flap Wheels, 3" x 1" x 1/4" - 5 Pack (80 Grit)
$47.40

NuoDunco 31Pcs Sanding Cones 1/4" Port and Polish Kit Cylinder Head Porting | 1/4" Shank Sanding Cartridge Rolls & Abrasive Bits For Die Grinder, Aluminum Oxide Engine Porting Tools & Tapered Sandpaper.
$27.71

Mixiflor 7Pcs Abrasive Nylon Wheel Brush Woodwork Polish Grinder | 80# 120# 180# 240# 320# 400# 600#
$26.68

AOKLIT 24 Pcs 80 Grit 1/4inch Abrasive Flap Wheel Sander Set,Aluminum Oxide Flap Wheels Cylindrical Cone Shape Sanding Wheel for Remove Rust and Weld Burr
$27.99

FOXBC 3 Inch Cut Off Wheel Discs, Metal & Stainless Steel Cutting Disc for Die Grinder, 3” x 3/64” x 3/8” - 50 Pack
$45.94

12 PCS Strip Discs 4" x 5/8" Stripping Wheel Suitable for Cleaning Angle Grinder to Remove Paint, Rust and Weld Oxidation(Blue&Purple)
$35.98

Pomsare 80PCS Angle Grinder Sanding Discs, 5 Inch Upgraded Hook and Loop Backing Pad Attachments with 5/8-11 Threads, Sanding Pad for Wood Sanding Buffing Polishing(40/60/80/120/180/240/320/600 Grit)
$24.64

Rocaris 40 Pack 1 inch Abrasive Wheel Buffing Polishing Wheel Set | 1/8" Shank (25mm), for Rotary Tool
$19.99

4in Sanding Mop for Drill, 120 Grit Flap Wheel Sander Stars, 1/4in Shank | Medium Grit Smooths Moldings, Carvings, Contours and Raised Panels and Clears CNC Fuzzies, Fits Drill Press, Die Grinder
$17.55

WA 10PK Sanding Discs 4.5" 36 Grit Silicon Carbide Masonry Disc | 4-1/2 in (115mm) semi-flexible silicon carbide disc for masonry, concrete, granite and coating removal.
$49.99