Loonie PerksDeals for Canada
BlogSearch
Product guide

Brush Research Flex-Hone GB33432, 3-3/4-inch, 320-grit silicon carbide

Brush Research Flex-Hone GB33432 is a flexible honing tool with a 3-3/4-inch bore diameter and 320-grit silicon carbide abrasive. It is listed for deburring and finishing mild steel, stainless steel, cast iron and softer ferrous materials, making bore size and work material key fit checks.

At a glance

  • Flexible nylon filaments carry bonded silicon-carbide abrasive globules, according to the listing.
  • Manufacturer information describes the tool for bore finishing and cross-hole deburring using a rotating spindle.
  • The listed tool size is intended for bore diameters between 3.501" and 3.750".
Price
$107.35Save 12%

Reference price: $121.99

Price checked: Nov 20, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The 320-grit silicon-carbide abrasive is specified for mild steel, stainless steel, cast iron and softer ferrous materials.
  • Manufacturer-listed bore sizing and shank dimensions help buyers check fit before ordering.
  • The listed applications include finishing and deburring, including cross-hole work.

Technical specifications

17 specifications
Identity
BrandFlex-Hone
ModelGB33432
Dimensions and installation
Dimensions listed35.6 x 12.7 x 13 centimetres
Weight listed454 g
Bore diameter3.75 inches
Abrasive part length3.50"
Shank diameter0.310"
Overall length13.5"
Bore diameter range3.501"-3.750"
Abrasive and use
Material listedSilicon Carbide
Grit320 Grit
Bristle constructionAbrasive Globule Bonded To Flexible Nylon Filament
Recommended usesDeburring, Finishing
Listed compatible materialMild Steel
Listed finish range18 - 30 Microinch (.5 - .7 Micrometer)
Other listed details
ColourGrey
Country of originUSA

What to know before buying

Listing details to confirm

The title and feature text identify the tool as 3-3/4" (95mm), while the details also list a 3.75-inch diameter and the feature specifies use in bores from 3.501"-3.750". Confirm the actual bore and tool fit before purchase. The listed dimensions and weight also differ slightly between detail entries, and the material compatibility detail names only mild steel while the title and feature text additionally name stainless steel, cast iron and softer ferrous materials. The stated 18 - 30 Microinch (.5 - .7 Micrometer) finish is a manufacturer claim, not an independently confirmed outcome.

What’s in the box

Included
  • 1 FLEX-HONE® Tool

Who is it for?

A good fit for

  • Machinists and engine or cylinder rebuilders finishing bores within the listed diameter range.
  • Buyers seeking a 320-grit silicon-carbide hone for the listed ferrous materials.
  • Users needing a hone described for both bore finishing and cross-hole deburring.

Less suited to

  • Buyers whose bore diameter falls outside the stated 3.501"-3.750" range.
  • Users working with materials or applications not established by the listing.
Brush Research Flex-Hone GB33432, 3-3/4-inch, 320-grit silicon carbide · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 72 ratings
  • 5 stars84%84%
  • 4 stars10%10%
  • 3 stars0%0%
  • 2 stars2%2%
  • 1 star4%4%

Aggregate ratings lean positive, with most ratings in the five-star category, though a small share are low ratings. Without written feedback, these figures do not identify customer-reported strengths or explain the lower ratings. They offer limited reassurance only, and do not establish how well the tool fits a particular bore or achieves the listed finish.

Frequently asked questions

What bore size is this Flex-Hone listed for?

The feature listing states a use range of 3.501"-3.750". The title calls it 3-3/4" (95mm), so confirm the selected tool's fit against your bore before ordering.

What material is the abrasive?

The listing specifies silicon carbide at 320 grit.

Which materials and tasks are listed?

The title and feature text name mild steel, stainless steel, cast iron and softer ferrous materials, with deburring and finishing as recommended uses. The details field specifically names mild steel, so treat the broader material list as a listing claim.

What is included?

The manufacturer contents entry lists one FLEX-HONE® Tool.

Brush Research Flex-Hone GB33432, 3-3/4-inch, 320-grit silicon carbide · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
Ingersoll-Rand 5102MAX Air Die Grinder
Ingersoll-Rand 5102MAX Air Die Grinder

C$76.06

C$65.99

-13%
-13%
Product details in Markdown