1 / 6BOSYTRO 12v-1000w 12V Switching Power Supply
Power: The BOSYTRO 12v-1000w is a switching AC-to-DC supply specified for 12-volt equipment, with a built-in cooling fan and clamp-friendly terminals. Its claimed 1000-watt maximum comes with a more conservative recommendation to use equipment below 800 watts, so match it to the load rather than sizing by the headline figure alone.
At a glance
- Listing describes two nickel-plated copper terminals intended for direct clamp connections.
- Built-in fan and vent openings are specified for cooling, with anti-slip pads underneath.
- The listing recommends equipment below 800 watts despite claiming a maximum output of 1000 watts.
- The listing describes overload, over-current and short-circuit protection, with other sections also mentioning overvoltage and overheat protection.
Pros and cons
Pros
- Clamp-friendly terminals may simplify connecting suitable DC loads without screw installation.
- A fan and ventilated aluminum enclosure are practical features for a supply intended for substantial loads.
- The listing identifies uses including LED strips, CCTV, 3D printers and motor pumps.
Cons
- The manufacturer recommends keeping equipment below 800 watts, limiting practical sizing below the stated 1000-watt maximum.
- The listing says the unit is not waterproof and is for indoor use only.
Technical specifications
11 specifications| Brand | BOSYTRO |
|---|---|
| Model | 12v-1000w |
| Output voltage | 12 volts |
|---|---|
| Maximum output current | 83 A |
| Maximum output power | 1000 watts |
| Form factor | rectangular |
|---|---|
| Dimensions listed | 21 x 11 x 5 centimetres |
| Weight listed | 907 g |
| Connector type | Alligator clips, General-purpose electrical connectors |
| Material listed | Aluminum |
|---|---|
| Specifications claimed | UL, FCC, CE, CSA, CUL |
What to know before buying
Listing details to confirm
Listing details are inconsistent: input is given as 110 volts in the specifications, 110V–240V in the feature text, and 115V/230V with a selectable gear position elsewhere. The 1000-watt, 83A maximum is also paired with advice to use loads below 800 watts and not exceed 80% of full load. For motors and other inductive loads, check starting current and the stated need for peak capacity above twice motor power. The listed compliance marks and protection features are manufacturer claims, not independently confirmed here. High voltage is stated to be inside the unit, and the listing says not to remove the cover.
Who is it for?
A good fit for
- Buyers powering compatible 12V DC equipment such as LED strips, CCTV systems, or electronics projects.
- Users who want clamp-style connections and can keep the load within the listing's conservative operating guidance.
Less suited to
- Outdoor or wet-location installations, as the listing specifies indoor use only and says the supply is not waterproof.
- Loads that require an adjustable output voltage, since this model is specified at 12 volts.
- Motor loads where startup current or required peak capacity has not been checked.

Customer reviews on Amazon
- 5 stars
79% 79% - 4 stars
8% 8% - 3 stars
4% 4% - 2 stars
2% 2% - 1 star
7% 7%
Customer feedback describes the converter as functioning well and delivering good power, with positive remarks about quality and value. Durability concerns are also reported, including some units said to have failed after a short time, while power feedback is mixed. For a high-load 12V application, the reported output satisfaction may be relevant, but durability matters particularly if downtime is costly, and the listing's recommended load limits still apply.
Positive themes
- Customers report that the converter functions well and provides good power output.
- Feedback includes positive impressions of quality and value.
Negative themes
- Durability concerns include reports of some units failing after a short period.
Mixed feedback
- Power feedback is mixed, so reported output satisfaction is not uniform.
Frequently asked questions
What output does this BOSYTRO supply provide?
The listing specifies 12 volts DC, with a claimed maximum of 83 A and 1000 watts. It recommends equipment below 800 watts and also advises keeping use at no more than 80% of full load.
Can I use it with a motor pump?
The listing names motor pumps as a possible use, but says to check starting current and notes that motor peak power needs to be more than twice motor power. Confirm the motor's startup requirements before choosing this supply.
Can it be used outdoors?
The listing says it is not waterproof and is for indoor use only.
What input voltage does it accept?
The listing gives conflicting input details: 110 volts in the specifications, 110V–240V in feature text and 115V/230V with a selectable position in another section. Confirm the input range and switch setting for the selected unit.

Alternative options

BOSYTRO 110V to 12V Converter DC Power Supply Adjustable 0-12V 0-50A SMPS Max 600W Switching Power Supply for Led Strip, Motor Pump, CCTV, 3D Printer, Lab Computer
$63.99

VAYALT 12V 100A 1200W DC Switching Power Supply, Universal Regulated Switching AC 110V/220V to DC 12V Transformer, 12V Power Supply for Industrial, CCTV, Computer Project, 3D Printer, LED Strip Light
$79.41

BOSYTRO Upgrade 12V Switching Power Supply 1000W 83.3A SMPS 110v to 12v Converter, with Power Cord and Safety Switch, AC to DC Converter for 3D Printer, Led Strip, Motor Pump, CCTV
$58.07

BOSYTRO 60V Adjustable dc Power Supply 600W,Switching Power Supply AC 110V/220V to DC 0-60V DC Converter with LED Digital Display, 5V 12V 24V 48V Buck Converter for 3D Printer,CCTV,Dimmable LEDs
$56.84

BOSYTRO 60V 16.6A 1000W DC Switching Power Supply, Universal Transformers AC110V/220V (SMPS), Upgraded Output Port with Power Cord, 60 Volt Power Supply for 3D Printer, CCTV Camera Security System
$69.99

NUOWEIDE DC 48V 12.5A 600W Power Supply 110V AC to DC 48V Converter | 12.5A 600W Power Supply Adapter for 48V Drive Sensor Lamp Meter Controller Servos Electric Motor and More
$58.23

BOSYTRO Upgraded Adjustable 0-50V 0-10A 500W Switching Power Supply, 110V/220V AC to DC Converter 5V 12V 24V 30V 48V DC Power Supply for Led Strip, Motor Pump, CCTV, 3D Printer, Lab Computer
$65.74

BOSYTRO Upgrade 12V Power Supply, 110v to 12v Converter, 1200W 100A Transformer, with Power Cord and Safety Switch, AC to DC Converter for 3D Printer, Led Strip, Motor Pump, CCTV
$73.03

VAYALT DC 12V 41.6A 500W Switching Power Supply, 110V/220V AC to DC Converter, Universal Regulated Switching,12V Power Supply for CCTV Camera System,3D Printer,Led Strip,Computer Project
$39.97

240W Laptop Charger for Asus Rog Zephyrus G14 G15 G16 M16 S15 S17 Duo 15 16 | Compatible with Strix Scar 15 17 G15 G17 G513 G733 G533 G713 GU603 GX550 GX551 GX650 GX701 ADP-240EB B
$85.49

BOSYTRO Upgrade 12V DC Power Supply 600W 50A 110v to 12v Converter Switching Power Supply for Led Strip, CCTV, 3D Printer, Motor Pump, Electronic Instruments, Lab Computer, with Power Cord
$47.51

BOSYTRO 24V DC Power Supply 600W 25A AC to DC Converter for 3D Printer, Led Strip, Motor Pump, CCTV, Electronic Instruments, Lab Computer
$70.38