1 / 7Bestarc BTC500DP PRO 50A Dual-Voltage Plasma Cutter
Dual-Voltage: Bestarc BTC500DP PRO is a 50A plasma cutter listed for 110V/220V use, with a pilot arc and Bluetooth app control. Its claimed 20mm maximum cut is specified only at 220V and 65PSI, and compressed air is required but the compressor is not included.
At a glance
- Dual-voltage operation is promoted for 110V and 220V. The listed cutting capacities differ by input and air-pressure conditions.
- Non-touch pilot arc is intended for rusty, painted, dirty or rough metal surfaces, according to the listing.
- Bluetooth app control is claimed for adjusting current, switching modes, saving settings and checking operating conditions remotely.
- An air sensor, breathing status indicator and fault-code display are listed for monitoring and troubleshooting.
Often bought together
Pros and cons
Pros
- Mode-specific cutting capacities make the intended input and air requirements clear in the feature description.
- Adjustable 2T/4T trigger operation and PA/PT timing are useful options for short cuts, continuous cuts and interrupted material such as mesh.
- The stated built-in air filter and 1/4 NPT quick connector aim to simplify connection to an air line.
Cons
- An external source of clean, dry compressed air is needed, and the listing explicitly says the compressor is not included.
Technical specifications
21 specifications| Brand | bestarc |
|---|---|
| Model | BTC500DP PRO |
| Power configuration | ac |
|---|---|
| Voltage listed | 110220 volts |
| Wattage listed | 11000 watts |
| Rated current in title | 50A |
| Voltage in title | 110V/220V |
| Maximum cutting thickness | 20mm@50A 220V 65PSI |
| Recommended cutting capacity | 12mm@35A 110V 50PSI |
| Recommended air pressure | up to 65 PSI |
| Airflow rate | 250 L/min |
| Recommended circuit breaker | up to 40A@110V; Up to 30A@220V |
| Arc start | high-frequency non-touch pilot arc starting |
|---|---|
| Trigger modes | 2T/4T |
| PA time adjustment | 3–15 seconds |
| App control range | 33–49 ft (10-15 meters) |
| Weight listed | 7.78 kg |
|---|---|
| Parcel dimensions | 45.72 x 30.73 x 25.4 cm; 7.78 kg |
| Material listed | ABS, iron, Electronic |
|---|
| Colour | Blue |
|---|---|
| Warranty description | 2 Year Manufacturer |
What to know before buying
Listing details to confirm
The listing is internally inconsistent: the title says 50A IGBT and 110V/220V, while the details give voltage as “110220 volts” and wattage as “11000 watts.” It also claims a maximum 2/3-inch cut in the feature text but specifies 20mm@50A 220V 65PSI elsewhere. Confirm the exact electrical ratings and the selected unit's configuration before purchase. Cutting figures are manufacturer claims, not independent measurements. A clean, dry air supply is required, with the stated capacity depending on voltage and pressure.
What’s in the box
Included- 20mm Max cutting thickness @220V 65PSI
- APP Control
- Breathing Light
- Screen
- Built-in Regulator
- Air sensor
- Set up within 1 min
- Mesh cut
- Rust Removal
- Pilot arc plasma cutting torch
Who is it for?
A good fit for
- Workshop or repair users who need a cutter advertised for both 110V and 220V supplies and can provide compressed air.
- Buyers who want non-touch pilot-arc starting, adjustable trigger modes and app-based settings control.
- Users preparing rusty or painted metal or working with mesh, subject to the stated air and input conditions.
Less suited to
- Buyers who need a self-contained cutter with an onboard compressor.
- Anyone who requires independently confirmed electrical ratings or cutting performance before choosing a machine.
Customer reviews on Amazon
- 5 stars
88% 88% - 4 stars
10% 10% - 3 stars
0% 0% - 2 stars
2% 2% - 1 star
0% 0%
Aggregate ratings are strongly positive overall, with most ratings in the five-star category, but a small two-star share means the score does not represent every buyer's experience. With no written customer feedback available, the ratings do not identify specific strengths or explain concerns. Buyers should assess the stated electrical and cutting claims against their own setup needs.
Frequently asked questions
What cutting thickness does the listing claim?
It gives a maximum of 20mm at 50A, 220V and 65PSI, and recommends up to 12mm at 35A, 110V and 50PSI. These are manufacturer claims, not independently confirmed results.
Does it include an air compressor?
No. The listing says a clean, dry compressed-air supply is required and that the compressor is not included.
Can it cut rusty or painted metal?
The listing describes a non-touch pilot arc and a rust-removal mode for rusty, painted, dirty or rough surfaces. Actual results depend on setup and material.
What should I confirm about the electrical specifications?
The title claims 110V/220V and 50A, but the details field gives “110220 volts” and “11000 watts.” Confirm the exact ratings and configuration for the selected unit before buying.
Alternative options
Bestarc 50A Plasma Cutter Machine, Pilot Arc, IGBT 110V/220V Dual Voltage | 1/2" Clean, 2/3" Max Cut, Large Led Display, Mesh Cut, PA/PT, 2T/4T, Painted Metal, Air Sensor, For Home DIY
$239.99
Bestarc 55A Non-HF Plasma Cutter, Blow Back Pilot Arc, 110V/220V | 5/8" Clean Cut 4/5" Max Cut, Post Flow, Large LED Air Sensor, 2T/4T for Beginners DIY
$256.49
ARCCAPTAIN iControl CUT55 Pro Plasma Cutter Machine, 55Amp, 120V/240V | APP Control, 1/2" Clean Cut 3/4" Max Cut, Non-Touch Pilot Arc, 1/4 NPT Fitting, Large LED Display, 2T/4T, IGBT for Home DIY
$489.99
FLARING FC650DL Plasma Cutter 65 AMP Non Touch Pilot Arc Plasma Cutter Machine 120/240V Dual Voltage, High Frequency IGBT Inverter, 1/2"(12.7mm) Clean Cut 5/8"(16mm) Severance Cut with Consumable Set
$249.99
YESWELDER Multifunctional CUT-65DS Plus Plasma Cutter, 65A Non-HF Pilot Arc | Plate Cutting, Grid Cutting, Gouging, and Marking Versatility, 110V/220V, ETL Certified, Overload and Overheat Protection
$509.99
ARCCAPTAIN 55A Plasma Cutter Machine, Non-Touch Pilot Arc, 120V/240V | 3/4" Max Cut, 1/2" Clean Cut, 2T/4T, HF Pilot Arc, DC Inverter IGBT, Clean Cuts on Rusty or Dirty Metal, For Home DIY
$359.99
Reboot Plasma Cutter with Built in Air Compressor 40A 120V IGBT Inverter Digital Cutting Machine, 3/8 Inch Clean Cut and 3/5 Inch Max Cut High Frequency
$399.99
![ARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter Machine, APP Control | 55Amp Blowback Pilot Arc, Plasma Gouging, Expanded Metal, Rust Removal, Pressure Detection, 120V/240V, Upgraded LED Display](/i/0KkvMT41fQM_Yy6SLSvX75nWjtLoaBI-vf_fW9eBhJaCypw17DurFk1JNzitE_QDRcOLCYhvZM6z3Tk7m2CLatAWZuPWPErRqBvkhQLsqbkEc44DJeDiLYtGEG21O8gwI035ZnMTFs4.jpg)
ARCCAPTAIN iControl CUT55 MP [Non-HF] Plasma Cutter Machine, APP Control | 55Amp Blowback Pilot Arc, Plasma Gouging, Expanded Metal, Rust Removal, Pressure Detection, 120V/240V, Upgraded LED Display
$639.99
SILATU 75A Plasma Cutter Machine, HF Pilot Arc, 120V/240V, 1'' Max Cut | 5/8'' Clean Cut, IGBT Inverter, LED Display, Air Pressure Monitor, 2T/4T, PA/PT for Home DIY, Cut on Rusty, Dirty Metal
$469.99
Bestarc 50A Non-HF CNC Plasma Cutter, Blow Back Pilot Arc, Large LED | 110V/220V Dual Voltage, 5/8" Clean Cut 1" Max Cut, Post Flow, 2T/4T, Air Sensor for Beginners DIY
$499.99
YESWELDER Stick Welder Large LED Display 205Amp Digital Inverter IGBT Welding Machine,110V/220V Dual Voltage Hot Start Portable MMA ARC Welder Machine
$179.99
Reboot 60A Plasma Cutter Dual Voltage 120V/240V, 1/2" Clean Cut IGBT Inverter, Portable Metal Cutting Machine with Torch & Tips - RBC6000D 2025 Upgraded (Pre-Installed Air Regulator)
$219.99