1 / 5attwood 9300FDV7 Fuel Demand Valve
The attwood 9300FDV7 Fuel Demand Valve is listed for installation between a fuel tank and primer bulb, where it is claimed to meter fuel on engine demand and limit pressurized fuel reaching the engine. Check hose and fitting compatibility before ordering.
At a glance
- Designed to allow fuel through as requested by the engine, according to the listing.
- Listing claims it helps prevent flooding and spillage from pressurized fuel.
- Compatible hose sizes are listed as 3/8-inch and 5/16-inch.
- A built-in manual override and compatibility with ethanol-blended fuels are claimed in the product description.
Often bought together
Pros and cons
Pros
- Accommodates two listed fuel-hose sizes, 3/8-inch and 5/16-inch.
- The stated installation position makes its place in the fuel line clear: between the tank and primer bulb.
Technical specifications
18 specifications| Brand | attwood |
|---|---|
| Model | 9300FDV7 |
| Valve type | Needle Valve |
| Ports | 2 |
| Dimensions listed | 21.6 x 12.1 x 12.4 centimetres |
|---|---|
| Weight listed | 64 g |
| Installation position | Installs between the fuel tank and the primer bulb |
| Inlet connection type | hose_connection |
|---|---|
| Inlet connection size | 8.5 inches |
| Outlet connection types | 3/8-inch and 5/16-inch fuel hoses |
| Outlet connection size | 0.38 inches |
| Thread size | 3/8 inch en 5/16 inch |
| Thread type | National Pipe Thread (NPT) |
| Maximum operating pressure | 20 psi |
| Pressure-spike claim | 20 psi maximum nominal input pressure-protected for 40 psi pressure spike |
| Material listed | other |
|---|---|
| Exterior finish | painted |
| Specification met | CSA |
|---|
What to know before buying
Listing details to confirm
Connection details are inconsistent: the listing gives an 8.5-inch inlet size, a 0.38-inch outlet size, and also 3/8-inch and 5/16-inch hose and thread details. Confirm actual inlet and fitting dimensions and compatibility before purchase. The listing also describes 20 psi maximum nominal input pressure with protection for a 40 psi spike, which is not the same as a 40 psi operating rating.
What’s in the box
Included- Fuel Demand Valve
Who is it for?
A good fit for
- Boat owners replacing or adding a demand valve in a fuel line, if its fittings and hose sizes match their setup.
- Buyers seeking a valve the listing says installs between the fuel tank and primer bulb.
Less suited to
- Buyers who need confirmed inlet dimensions or a verified fit for a specific engine or fuel system without checking the listed connection details.

Customer reviews on Amazon
- 5 stars
73% 73% - 4 stars
15% 15% - 3 stars
6% 6% - 2 stars
2% 2% - 1 star
4% 4%
Customer feedback commonly describes the valve as functioning as intended and helping relieve fuel-tank pressure, while some customers report durability concerns, including failures around a year, and opinions on value are mixed. These experiences matter for buyers considering a fuel-line component, but they do not establish the cause of any failure or predict service life. The listing's pressure-control claims are product claims, not proof of individual customer outcomes.
Positive themes
- Customers report that it performs its intended function and helps relieve tank pressure.
Negative themes
- Some customer feedback reports limited durability, with failures around a year.
Mixed feedback
- Opinions on value for money are mixed.
Frequently asked questions
Where does the attwood 9300FDV7 install?
The listing says it installs between the fuel tank and the primer bulb.
Which fuel hose sizes are listed as compatible?
The listing specifies 3/8-inch and 5/16-inch fuel hoses. Confirm fitting dimensions as well, since other connection-size details are inconsistent.
What pressure limits does the listing state?
It gives a 20 psi maximum operating pressure and separately claims protection against a 40 psi pressure spike. The spike figure is not a stated continuous operating pressure.
Does the product description mention an override?
Yes. The description claims a built-in manual override, but the technical details do not further describe its operation.

Alternative options

879885Q 5/16" Inline Fuel Filter Compatible with Mariner 4-Stroke Outboard 35-879885T 35-879885Q Sierra 18-7718 Pack of 2
$21.60

Universal Fuel Line Assembly, 3/8" Fuel Line Hose for Boat Motor with Primer Bulb Connector, Hand Fuel Pump for Boat Marine Outboard Engine, Car, Tractors, Motorcycles, Jet Skis, Lawn Tractors
$22.99

Fuel Gas Line Assembly, Universal 3/8 inch Fuel Gas Line Assembly Outboard Hand Primer Bulb Fit for Marine Boat RV
$29.11

PumuHo Portable Outboard Boat Fuel Tank w/Connector 3 Gallon/12L Marine Boat Engine Include 3/8" Gas Hose Pump
$68.99

PumuHo Portable Outboard Boat Fuel Tank 6 Gallon/24L for Yamaha Mercury Marine Boat Engine Include 3/8" Gas Hose Pump
$77.99

Outboard Fuel line + External Fuel Pipes for Boat Hanger Hose Primer Tubing Tank Connector Fit for Mariner Outboard Motors
$31.52

1/4" Fuel Shut-Off Valves Compatible with Oregon 07-403 Scag 48568, 2 Pack | Compatible with Sunbelt B1SB868 and 180° Applications; Inline Valve for Diesel, Petrol and Gas Lines
$23.99

Tnisesm 5/16" 6FT Fuel Line Assembly, with Connector Rubber Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb 304 Steel Hose Clamps
$26.88

691035 493629 Fuel Filter 40 micron 1/4" Inline Filter for Briggs & Stratton 84001895 794079 56002, Kawasaki 49019-7001 7-07061, Toro Craftsman MTD Lawn Mower replacement part, 2 pack
$13.99

5/16 Inch (8mm) ID Fuel Line Hose 10FT NBR Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines
$17.98

Vkinman 9999800MA2 3E0-70270-0 5040795 Boat Engine Male Tank Side Fuel Connector Replacement for Nissan Tohatsu Evinrude Johnson OMC 8HP 9.9HP 15HP 20HP 30HP 40HP 50HP Outboard Fits 5/16’’/8mm Hose
$15.99

DasMarine Fuel Line Assembly 5/16" Inner Dia 7/16" Outer Dia Universal Fuel Line with Primer Bulb Steel Hose Clamps for Outboard Marine Boat Motor
$14.94
























