Loonie PerksDeals for Canada
BlogSearch
Product guide

ANYCUBIC Wash & Cure 3.0 Plus 2-in-1 Station

ANYCUBIC Wash & Cure 3.0 Plus combines resin-print washing and UV curing in one station, with a larger stated wash capacity and a curing area intended for models from light-curing printers up to 10.6 inches.

At a glance

  • Combines cleaning and curing modes, selected with one button.
  • A dual-layer platform is described for curing more models per cycle.
  • The PP cleaning basket supports washing with the platform at two adjustable heights.
  • The gooseneck light is intended to target detailed areas of a model.
Price
$199.99Save 24%

Reference price: $262.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • Two post-processing functions share one station, reducing the need to switch between separate cleaning and curing equipment.
  • The stated 7.6-litre basket and 12-litre bucket provide room for larger washing jobs than a compact setup.
  • Adjustable basket heights accommodate platforms from 6.6 to 10.6 inches.

Technical specifications

12 specifications
Identity
BrandAnycubic
Dimensions and installation
Weight listed6.9 kg
Parcel dimensions54.5 x 39.5 x 35 cm; 6.9 kg
Capacity and fit
Washing basket volume7.6 liters
Washing bucket total volume12 liters
Printer size suitability10.6 inches and below
Curing sizeφ220*260 millimeters
Cleaning basket adjustable heights150 millimeters and 250 millimeters
Supported printing platform size6.6 to 10.6 inches
Operation
Adjustable wash and cure time1 to 30 minutes
Curing claims
Gooseneck light energy increase30,000uW/cm² in the 1~3cm irradiation range
Curing uniformity improvement20%

What to know before buying

Listing details to confirm

The manufacturer describes the curing size as φ220*260 millimeters and claims a 20% uniformity improvement over the previous generation, while an accompanying detail identifies that comparison as the 2.0 Plus. Treat the performance figures as manufacturer claims, not independently measured results. The stated printer-size suitability refers to light-curing printers of 10.6 inches and below.

Who is it for?

A good fit for

  • Resin 3D-printing users who want washing and curing in one station.
  • Owners of larger light-curing printers whose platforms fall within the stated 6.6 to 10.6-inch range.
  • Users who want adjustable wash-basket height or a gooseneck light for targeted curing.

Less suited to

  • Buyers seeking a station for filament-based printing workflows rather than resin-print post-processing.
  • Users whose printer or model exceeds the listed size ranges.
ANYCUBIC Wash & Cure 3.0 Plus 2-in-1 Station · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 13 ratings
  • 5 stars87%87%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star13%13%

Aggregate ratings lean strongly positive, but a smaller one-star share means reactions are not uniformly favourable. With no written customer feedback supplied, the ratings do not explain what buyers liked or disliked. For a station with substantial stated capacity and two operating modes, they are only a broad indication and do not confirm fit or curing performance for a particular workflow.

Frequently asked questions

What does the ANYCUBIC Wash & Cure 3.0 Plus do?

It combines cleaning and curing modes for resin 3D-print post-processing. The listing describes selecting each mode with one button.

What is the stated washing capacity?

The listing states a 7.6-litre washing basket and a 12-litre total washing-bucket volume.

What printer platform sizes does the cleaning basket support?

The manufacturer says the basket has adjustable heights of 150 millimeters and 250 millimeters and supports platforms from 6.6 to 10.6 inches.

Can wash and cure times be adjusted?

The listing says cleaning and curing time can each be adjusted from 1 to 30 minutes.

ANYCUBIC Wash & Cure 3.0 Plus 2-in-1 Station · photo 3
Additional product photo 3

Alternative options

Product details in Markdown